 |
 |
 |
 |
 |
Antique Case Tractor Parts
HOT Coil (55000 Volts)
For 12 Volt systems (Maximum voltage for faster starting, Reduces plug fouling for longer plug life)
Universal Voltage Resistor (2 Terminal Style)
Used to reduce voltage from 12 Volt to 6 Volt, Replaces #CR107
Starter Drive Assembly
Fits Case V, VA, VAC WITH STARTERS: M24072, M24114
NOTE: 10 TEETH --- ORIGINAL SPRING STYLE
Positive Rachet Style Drive (Improved)
Fits Case V, VA, VAC WITH STARTERS: M24072, M24114
NOTE: 10 TEETH --- IMPROVED POSITIVE RATCHET STYLE DRIVE
Generator Cut-Out Assembly
Case RC & V Series (1939-1943), Replaces Auto-Lite 9-4 & 9-5
(NOTE - Mounting tabs are parallel with cut out)
12 Volt (3 Terminal)
External Voltage Regulator (Saddle Mount)
Fits Case 700, 730, 800, 830, 900, 930, 940 & 1030, Combines 800, 1000, 1010 & 1060, Replaces #1118991
- To convert 6 volt to 12 volt
- NEW, not Rebuilt
One Wire 63 Amp Alternator
NEW not Rebuilt) (10 square inch surface area, 6-1/4 inches housing diameter, 2-1/2 inches pulley diameter, 5/8 inch belt width)
NOTE: Must rev engine to 800 - 850 RPM in order for unit to self excite. INSTALLATION: Run a wire from the alternator through the amp gauge to the positive side of the battery.
Alternator Pulley only
For ABC418 Alternator above. (.670" shaft diameter, 2-1/2 pulley O.D., 5/8" belt width)
Universal Alternator Mounting Kit
(Used when switching from a generator to an alternator) NOTE - Does not include the top adjusting bracket.
Universal Push / Pull Ignition Switch
(2 Position) with White Plastic Knob
Fits AG Light Industrial Equipment 30 AMP, 3/8 inch diameter thread, 2 Terminals, Non-fused)
3-Position Switch
(High / Lo / Charge)
Fits Case VAC, VAH, VAI & VAO (All up to SN #5060679), Replaces #VTA463
Knob (Says "Lights")
For ACS139 Switch above
3-Position Fused Switch
Fits Case V, VC, VI, VO, Replaces VT2108,
Note: 15 AMPS --- 4 TERMINAL --- INCLUDES BLACK PLASTIC KNOB
Knob (Plain Face)
for 3-Position Switch
Fits Case VAC, VAH, VAI & VAO (All up to SN #5060679)
6 and 12 Volt Dash Lamp w/ Bulb
Fits Case models, (1/8 inch longer from flange to first lip, 21/32 inch diameter thread) USA MADE
BLACK Dash Lamp Cover
(1 inch Diameter)
Fits Case models
Chrome Dash Lamp Cover
(1 inch Diameter)
Fits Case models
12 Volt Dash Lamp Assembly
Fits Case 530 SN 8262800 - 8650135, 570 SN 8656925 & UP, 730, 830, 930, 1030 (1966 THRU 1969) --- COMBINES: 660 THRU 1660 --- INDUSTRIAL: 580B, 584, 585, 586 CKB, 580, Replaces: A24087
Notes: INCLUDES 12 VOLT BULB
Dash Lamp Cover (BLack)
(1 1/4 inch Diameter)
Fits the above JDS648V12 Dash Lamp
12 Volt Bulb
Fits the above JDS648V12 Dash Lamp
