Antique Case Tractor Parts

Gear Shift Knob
(Plastic)

Fits Case VAC, D, DC, S, SC, 200B, 300B, 320B, 400B, 420B, 425, 500B, 600B, 600, 700, 800 & 900, Replaces #03501AB

Transmission Gear Shift Lever Knob

Case 430, 530, 630, 730, 830, 470 & 570, INDUSTRIALS - W3, W5, W5A, 470, 480, 480B, 580, 580B, 680C, 680E, 310B, 584, 585, 586 & W9
CRAWLERS - 350B, 310G, 750 & 1000, Replaces Case #A26727, All Ford models with 4 & 5 Speed Transmission models, Replaces Ford #BB7213A
(I.D. - .325 inch - 24, 1.045 inch Deep, 1.585 inch tall, 1.985 inch O.D., .730 inch bottom stem O.D., 3/8 inch - 24 thread)

Knob (Plastic)
1.26 inch diameter, 3/8 inch N.F.

For Hydraulic Remote Levers for Case 430, 530, 470, 570, 480, 480B, 580, 680B, 780, W5A, W7, W9A, W10, W12, W24 & W24B, Replaces #A14051

Double Spoked Steering Wheel

Fits Case D, DC, DH, DO, DV, S, SC, SO, Replaces 04935AB, 17" DIAMETER

Steering Wheel

Fits Case DC & SC & VAC with wide front, Replaces #07779AB (17 1/2 inches diameter, bare spokes, tapered keyed hub 1 inch to 7/8 inch)

Steering Wheel

Fits Case VA, VAC, VC, V, VI & VO, Replaces #A7668 & #VT2230, (16 inches diameter, keyed hub, 7/8 inch - 1 inch shaft)

Steering Wheel

Fits Case 200B, (300B & 400B SN #6120001 & up), (320, 420, 430 Ag & Utility up to SN #8262800), 430 Draft O Matic SN #8262800 - #8297800, (430 with Dual Front Wheel SN #8297801 - # 8650135, 470 with Dual Front Wheel SN #8656925 & up, 500B series (Pin 6095009 & after), 510B, 511B, 530 gas & diesel up to SN #8262800, 530 Draft O Matic with Dual or Single Front Wheel SN #8262800 - #8297800 (SN #8297801 - #8650135 with Dual Front Wheel), 570 with Dual Front Wheel SN #8656925 & up, 600B series (PIN 6095009 & after), 610B & 611B, 630, 700 Wheel Tractor, 730 series Comfort King Draft O Matic, All 730 EXCEPT General Purpose & Hi Crop, 800 Wheel Tractor, 830 series Comfort King Draft O Matic General Purpose, 830 EXCEPT Grove, General Purpose & Hi, 930 series Comfort King, 930 series Comfort King Western Special SN #8258382 & up, 1030 Comfort King Draft O Matic, 580 Industrial, 800 (Grain) Combine, 1000 Rice Head Attachment Combine, 1010 Combine, Replaces # A20456 (Splined hub, 40 splines, Covered to Center spokes) CHECK HUB TYPE & COUNT BEFORE ORDERING

Steering Wheel Center Emblem

Fits Case 430, 530, 630, 730, 830, 930 & 1030, Replaces #A20475 (Plated, Background not painted) USA MADE

Steering Wheel (Black)

Fits David Brown 770, 880, 990, 1200 diesel, 3800 & 4600 gas, Replaces #K83746 & #914001
(17-5/8 inches diameter, 3 covered to center spokes, 11/16 inch - 13/16 inch shaft, keyed tapered hub) (NOTE - Not white as original.)

Steering Wheel Nut

Fits 200B, 300B, 400B SN 6120001 & UP, 320, 420, 430 AG & UTILITY UP TO SN 8262800; 430 DRAFT-O-MATIC SN 8262800 - 8297800; 430 W/ DUAL FRONT WHEEL SN 8297801 - 8650135; 470 W/ DUAL FRONT WHEEL SN 8656925 & UP; 500B SERIES (PIN: 6095009 & AFTER), 510B, 511B, 530 GAS & DIESEL UP TO SN 8262800, 530 DRAFT-O-MATIC W/ DUAL OR SINGLE FRONT WHEEL SN 8262800 - 8297800 (SN 8297801 - 8650135 W/ DUAL FRONT WHEEL), 570 W/ DUAL FRONT WHEEL SN 8656925 & UP, 600B SERIES (PIN: 6095009 & AFTER), 610B, 611B; 630, 700 WHEEL TRACTOR, 730 SERIES COMFORT KING DRAFT-O-MATIC, ALL 730 EXCEPT GENERAL PURPOSE & HI-CROP; 800 WHEEL TRACTOR, 830 SERIES COMFORT KING DRAFT-O-MATIC GENERAL PURPOSE; 830 EXCEPT GROVE, GENRAL PURPOSE & HI; 930 SERIES COMFORT KING WESTERN SPECIAL SN 8258382 & UP; 1030 COMFORT KING DRAFT-O-MATIC; INDUSTRIALS: 580, OTHERS; COMBINES: 800 (GRAIN), 1000 RIDE HEAD ATTACHMENT, 1010, D, DC, DI, DO, S, SC, SI, SO, V, VC, VA, VI, VO, VAC, VAH, VAI, VAO, VAW, L, LA, LAI, LAH, 500, 600, Replaces 25-1512
NOTE: FINISH BARE DIMENSIONS 3/4 X 16

Slip Fit or Economy Coupler
(For Power Steering Conversion)

For IHS554 & IHS555 Generators

Torque Generator
(Standard)

For pulling a wagon, etc... (Torque Output at 1000 PSI = 7000 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 108 RPM, Recommended Fluid Input = 2.5 to 3 GPM)

Torque Generator
(Heavy Duty)

For when a front loader is used (Torque Output at 1000 PSI = 1100 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 65 RPM, Recommended Fluid Input = 3 to 4 GPM)

Port Block

Needed only if either of the Torque Generators above is purchased

Power Steering Priority Flow Control Valve

Fits Case MODELS WITH LIVE HYDRAULICS
3/4" INLET & RETURN --- 1/2" PRESSURE PORT
NOTE: ELIMINATES BELT DRIVEN PUMP, PULLEYS & BRACKETS. ENABLES YOU TO USE YOUR LIVE HYDRAULIC PUMP TO OPERATE THE POWER STEERING.

Bull Pinion
(long)

Fits Case 480B, 480C, 580 & 580B, Right Side with Differential Lock, Replaces Old #A38935 & New #144339 (20 & 13 teeth, 7 15/16 inches, 17 splines) CLOSE OUT!