Antique Case Tractor Parts

Crankshafts

Crankshaft

Fits Case 188 cubic inch diesel (no splines on end), Also fits Crawlers 310E, 310F, 310G, 350, 350B, 420C, 450; Tractors and backhoes 430, 470, 480, 480B, 480C, 480D, 480LL, 530, 570, 580, 580B, 630, Forklifts 584, 584C, 584D, 585C, 585D, 586, 586C, 586D, Skid Steers 1700, 1835, 1845, 1845B, 1845S, Roller 752, Loaders W3 - W5A, Replaces #A151015, Replaces casting #G11740 (No splines in flange) (Crankshaft has standard journals, bearings not available)

CKS059

$650.00

Crankshaft

Fits Case 207 cubic inch diesel (No splines in flange), Replaces #A144011 (Crankshaft has standard journals, bearings not available)

CKS063

$650.00

Crankshaft

Fits Case 200B, 300, 300B, 310, 310C, 320, 320B & 400B (all gas models) 148 cubic inch, Replaces Book # G11164, Replaces Casting #G11700, G11701 & G10071, Will not fit tractors with Block #G1235 (Rear Main Seal 3.375 inches, Rod Bearing diameter 1.9365 inches)

CKS064

$450.00

A = Inlet Length B = Inlet I.D. C = Shell Length

D = Outlet Length E = Outlet O.D. F = Overall Length

Vertical Round Body Muffler

Fits Case C, CC, D, DC, DI, DC-4 Thru 1954; 400 Gas-Dsl 1955-57; 700, 800 gas-dsl 1958-59
Shell Diameter = 4-1/4 inches, (A) Inlet Length = 3 inches, (B) Inlet I.D. = 2-1/4 inches, (C) Shell Length = 17 inches, (D) Outlet Length = 6 inches, (E) Outlet O.D. = 2-1/4 inches, (F) Overall Length = 26 inches) Use Raincap RCS006 below if needed

CKS109

RCS006

$38.95

Muffler

8.70

Raincap

See above

Vertical Round Body Muffler

Fits Case V, VA, VAC, 200B, 300B, 310, 350, 400B, 500B THRU 1959, 600B
Shell Diameter = 3-1/4 inches, (A) Inlet Length = 2-3/4 inches, (B) Inlet I.D. = 1-15/16 inches, (C) Shell Length = 16-3/4 inches, (D) Outlet Length = 9-1/2 inches, (E) Outlet O.D. = 2 inches, (F) Overall Length = 29 Use Raincap RCS005 below if needed