Antique International Tractor Parts

Antique International / Farmall Tractor Engine Gaskets and Parts
NOTE: Unless specified sets include all gaskets required when replacing the cylinder head

LP High Compression Cylinder Head

Fits: I6, M, MV, O6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, W6 (with C248, C264, C281 Gas or LP engines) Farmall Rowcrop: 400, 450 (with C248, C264, C281 Gas or LP engines) ], [ Wheatland: 400, 450 (with C248, C264, C281 Gas or LP engines); Replaces: 364586R11, 364586R1

Will bolt directly onto a gas engine for increased horse power. Head includes guides and seats and (6) manifold studs.---Sold separately, our IHS2227 LP high compression valve train kit is required for tractors switching from a gas cylinder head to the LP cylinder head as the LP head uses longer valves than the gas.---Valves must be ground to match seats & guides must be sized to the valves, etc. NOTE; As this was originally made for a 400,450 LP when mounting on a M or SUPER M there is no provision for the air cleaner breather line to rear of head, just block it off.--- AS THIS IS A BARE CASTING WITH GUIDES & SEATS---CUSTOMER IS RESPONSIBLE FOR ALL FINAL MACHINING INCLUDING HEAD SURFACING IF NEEDED--

Cylinder Head

International - Fits: Cub, 154, 184, 185 (Will fit with casting number 355691R2); Replaces: 351779R91, 251228R1

Cyylinder Head Gasket / Valve Grind Gasket Kit

Fits Cub 154, 184, 185 (except carb mounting gasket) ; Replaces: 352540R91

INCLUDES ALL GASKETS REQUIRED WHEN REPLACING THE CYLINDER HEAD.

Please note, if using on a Cub LoBoy 184 or 185, the carburetor mounting gasket will not work, the rest of the gaskets will work on those applications.

Valve Grind Gasket Set

Fits International ALL LISTED W/ WATER PUMPS AND C113, C123 (& C135 ENGINES UP TO SN 100500): SUPER A, SUPER C, 100, 200, 130, 140, 230, 240, 330, 340, Replaces 357476R95

Valve Cover Gasket With Copper Stud Grommets

Fits: TD9 (92 Series), Models with D236, D282, D301 and IH diesel: 150, 3600A, 3616, 3800, 3850, H50A, TD6-62 , TD9B (Industrial), 460, 560, 606, 656, 660, (with D282): 706; Replaces: 278308R3

Fits: Models with D236, D282, D301 and IH diesel engines: 214, 214A, 220, 220A, 414, 416, 420, 422 (Cotton Pickers)

Fits Combines : 715 (with D301), Models with D236, D282, D301 and IH diesel: 101, 151, 181, 315, 403, 503, 615

Valve Cover Gasket

International - Fits: H, HV, I4, OS4, Super H, Super HV, W4, 300, 350 (GAS OR LP); Replaces: 43976DC

Valve Tappet Side Cover Gasket

International - Fits: Cub, Cub Loboy, 154, 184, 185, Baler: 50T, 55T, Power Units: U1; Replaces: 251371R1

Fits Miscellaneous - Fits: Power Units: C60, UC60

Fits Combines - Fits: Combine: 52, 64

USA Made

Valve Cover Gasket

International - Fits: 915 (Late models with D414, DT414, D436, DT436, D466, DT466, DT466B, DTI466B.), 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, [ Industrial: 100E, 442, E200, E412, E433, H65C, H80B, L175C (some, with D414, DT414, D436, DT436, D466, DT466, DT466B, DTI466B), Hydro: Hydro 100, Hydro 186; Replaces: 1342828C1, 675109C3, 675109C2

IH Combines - Fits: Combine: 815 (Late models with D414, DT414, D436, DT436, D466, DT466, DT466B, DTI466B.), [ 1440, 1460, 1470, 1480 (with D414, DT414, D436, DT436, D466, DT466, DT466B, DTI466B.)

Valve Cover Gasket

Fits International Tractors: Fits: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856 (gas / LP, with C221, C263, C282, C291 and C301 engines), Industrial: 3616, 3800, 3850, H30B (with tilt valve engines, gas / LP), Forklift: 9000 (with tilt valve engines, gas / LP), [ Hydro: Hydro 70, Hydro 86 (gas / LP, with C221, C263, C282, C291 and C301 engines)

Fits: Combine: 101, 151, 181, 205, 303, 315, 403, 503, 615, 715 (gas)

Fits: Cotton Picker: 214, 214A, 220, 220A, 414, 416, 420, 422, 616, 622 (gas / LP, with BD220, C221, BD240, C263, BD264, C282, C291 and C301 tilt valve gas or LP engines

Replaces: 369983R2, 164421R1

USA Made

Valve Grind Gasket Set

Fits International H, HV, SUPER H, O4, OS4, I4, W4, SUPER W4, 300, 350 GAS, FOR C152, C169, C175 CUBIC INCH ENGINES.

Valve Grind Gasket Set

Fits International GAS: M, MV, SUPER M, MTA, W6, W6TA, T6, 400, W400, 450, W450, O6, I6, OS6, Replaces 354476R95

Cylinder Head Gasket / Valve Grind Gasket Kit

Fits Cub 154, 184, 185 (except carb mounting gasket) ; Replaces: 352540R91

Valve Grind Gasket Kit

Fits IH/Farmall A, Super A, AV, Super AV, B, BN & C, Replaces #354474R95 (Includes the following Gaskets - (1) Carburetor Mounting, (1) Cylinder Head, (1) 2-Piece Intake & Exhaust Manifold, (1) Valve Cover, (1) Water Outlet & (2) Valve Cover Stud Washers (For engines with 3 inch - 3-1/8 inch bore)

Farmall F20 Head Gasket Set

Fits International: FARMALL F20, T20 Dimensions & Notes: MADE IN THE USA

Complete Engine Gasket Set

International Farmall Complete Engine Gasket Set

Fits IH / Farmall: For the following 3-1/8" to 3-1/4" bore models equipped with a water pump - Super A, (sn 255418 and up), Super A1, Super AV, Super AV1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, T4 Crawler Other Info: For use on all models with C113 engines equipped with a water pump, C123 (and C135 up to engine sn 100500) Replacement: 356314R96, 381734R92, 356314R92, 362880R91, 367705R92

NOTE: Includes all gaskets and seals needed for your major engine overhaul. No governor seal is included.

Complete Engine Gasket Set

International - Fits: F12, F14, I12, O12, O14, W12, W14; Replaces: 46615D, 29424D

Includes all gaskets and crankshaft seals for your major engine overhaul.

USA Made

Complete Engine Gasket Set

International - Fits: Cub, 154, 184, 185; Replaces: 352539R91, 355733R96, 352540R91

For use on all models with C60 engines.rear seal must be used w/late retainer # 251363R2, seal will NOT fit tight in early retainer # 251363R1, if using early retainer either change to late retainer or use locktite 660 or similar to retain seal.

Includes all gaskets and crankshaft seals necessary for your major engine overhaul. No governor seal is included.

Complete Engine Gasket Set

International - Fits: F20, Regular; Replaces: 29537D, 12748D, 12734D

Includes all gaskets and crankshaft seals for your major engine overhaul.

Lower End Engine Gasket Set With Seals

International - Fits: ID6, MD, MDV, ODS6, Super MD, Super MDV, Super WD6, TD6, TD6-61, WD6, 400, 450 ( with D248, D264 and D281 diesel engines), Super MTA, W6TA ( with D248, D264 and D281 diesel engines, diesel) Wheatland: 400, 450 ( with D248, D264 and D281 diesel engines) Replaces: 332653R92

For complete gasket set order both IHS1855 and IHS1858 Sold Below

Cylinder Head Gasket Set

Fits: ID6, ODS6, Super MD, Super MDV, Super WD6, TD6, TD6-61, WD6, 400, 450 (with D264, D281 diesel engines), MDV, MV (when updated to D264 engine) ], [ Super MTA, W6TA (Diesel, with D264, D281 diesel engines), Wheatland: 400, 450 (with D264, D281 diesel engines)

Replaces: 261339R92

This is for engines with sleeves that protrude above the block.

International Farmall Flywheels, Ring Gears

International 454 Flywheel Complete With Ring Gear

Fits 454, 464, 574, 584, 674, 684, 784, Hydro. 84, 585, 595, 685, 885, Ind 2500A, 2500B, 2510B, 2514B, 3500A, all with D179 or D239 Engines
NEW FLYWHEEL
CLUTCH SIZE: 11", Step 1.443
INCLUDES: RING GEAR. DIESEL ONLY, DRILLED FOR STANDARD & HEAVY DUTY CLUTCH

Replaces LTP3136044

International 1066 Flywheel Complete With Ring Gear

Fits 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166 & 4366 & Engines - D414, DT414, D436 & DT436,
Fits 986, 966 When Converting to a 14" Clutch
Replaces A-672215C91, LTP672215
For a 14" Clutch

Farmall A, B, C Flywheel Ring Gear (90 Teeth)

Fits A, Super A, B, C, Super C, 100, 130, 140, 200, 230 & 240 (Gas Engines Only), Replaces 55755DB

Farmall H Flywheel Ring Gear

Fits H, Super H, I4, W4, Super W4, 300, 330, 340 & 350 (gas engines only), Replaces 45638DB (104 teeth)

Flywheel Ring Gear 84 Teeth

Fits: 55T, Cub, 184 (Baler).

84 Teeth. Measures 8.696 Inside diameter and 10.678" Outside diameter.