Kuhns Equipment Repair Equipment Repair, Preserving America's Memories One Tractor at a Time

John Deere A at Kuhns Equipment Repair
John Deere Tractor Parts
Loading
Front Wheels and Attaching Parts                                                view cart

All Rims are Subject To Additional Freight Cost Due to Size and Weight.


Front Wheel Blank

Fits John Deere - B, BO, BR

3 x 15. E - Coated black, For 3 Loop Style Rim - Remove tabs from old rim & weld into new blank rim.

Front Wheel with Weight Holes

Fits Many John Deere implement applications.

5 hole, 3" x 12". 3-1/8" pilot hole. 3" back spacing.

IHS195 $ 48.95 add to cart WHS020 $ 74.95 add to cart

6 Lug Front Wheel 3" X 15"

Fits John Deere - B (Serviceable, but will have a different offset from the original John Deere B, using 3" x 15" rim), M (SN: 43251 & up, using 3" x 15" rim), MT, 40, 320, 330, 420, 430, 1010 (Some, using 3" x 15" rim).

3" x 15", 6 Hole, 4-5/8" pilot hole. 3" center to center. 3.25" back spacing.

WHS019 $ 72.95 add to cart      

Front Wheel 6" x 15"

Fits John Deere - Some, Industrial: 300, 301, 400, 401 (Check offset before ordering), Some, Utility: 1010 (Check offset before ordering), Some,: 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4300, 4310, 4320, 4430, 4500, 4600, 4700 (Check offset before ordering).

6" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75"

WHS042 $ 70.75 add to cart      

Front Wheel 8 X15" 6 Lug

Fits John Deere - Some,: 1250, 1450, 1650, 2030, 2150, 2155, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 4030, 4040, 4120, 4210, 4230, 4240, 4310, 4320, 4430, 4500, 4510, 4520, 4600, 4610, 4700, 4710, 4720, 5045B, 5045D, 5045E, 5045U, 5055B, 5055D, 5055E, 5055U, 5065E, 5065U, 5075E, 5093EN, 5101EN, 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5420N, 5425, 5500, 5510, 5525, 5625 (with 2 wheel drive using 8 x 15" 6 lug rim), 5075U (with 2 wheel drive using 8 x 15" 6 lug rim )

8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" Back Spacing

For 9.5L-15, 10.00-15 and 11L--15 tires

USA Made

WHS070 $ 86.45 add to cart      

Front Wheel 4.5" X 16" 6 Lug

Fits John Deere - Some, using 4 1/2" x 16" 6 lug rim: 40, 430, 435, 440, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820 3 cylinder, 830 3 cylinder, MI (Serviceable for `some` it is 1/2" wider), Industrial, Some, using 4 1/2" x 16" 6 lug rim: 300, 301, 301A, 302, 400, 401, 401B (Serviceable for `some` it is 1/2" wider) , Compact, Some, using 4 1/2" x 16" 6 lug rim: 4500, 4600, 4610, 4700 (Serviceable for `some` it is 1/2" wider), Some, using 4 1/2" x 16" 6 lug rim: MT (Serviceable for `some` it is 1/2" wider; SN: 10001 and up).

6" CIRCLE WITH 4.625" PILOT 2500 LB CAPACITY FOR 5.50 x 6.00 x16" TIRES; TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4"

WHS022 $ 73.50 add to cart      

Front Wheel 6" x 16" 6 Lug

Fits John Deere - Some, Industrial: 210C, 300B, 301A, 302A, 401B, 401C, 480A, 480B, 300, 301, 302, 310, 400, 401, 480, 500, 500A (with 2 wheel drive using 6 x 16" 6 lug rim) ], Some,Industrial: 380 (with 2 wheel drive using 6 x 16" 6 lug rim), Some,: 5065M, 5075E, 5075M, 5078E, 5083EN, 5085E, 5085M, 5093EN, 5095M, 5101EN, 5105M, 5310N, 5320N, 5325N, 5415K, 5415N, 5420N, 5425N, 5510N, 5520N, 5525N, 5715HC, 5725N, 1020, 1120, 1250, 1450, 1520, 1530, 1650, 2010, 2020, 2030, 2040, 2120, 2240, 2440, 2630, 2640, 3010, 3020, 3120, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 5105, 5200, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5415, 5425, 5500, 5510, 5520, 5525, 5600, 5603, 5605, 5615, 5625, 5700, 5705, 5715, 5725 (with 2 wheel drive using 6 x 16" 6 lug rim).

6" x 16", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75"

WHS043 $ 82.75 add to cart      

Front Wheel Felt Dust Seal

Fits John Deere - A, AO, AOS, AR, AW, AWH, B, BO, BR, BW, BWH, D, DI, G, GH, GM, GN, GP, GW (On models using felt front hub seal), AN, ANH, BN, BNH (Use 2 felt seals per tractor and also used on front hub seal when a felt seal is used) , 50, 60 (Used on single front wheel and rowcrop models and On models using felt front hub seal), 70 (Used on single front wheel and rowcrop models Gas & Diesel and on models using felt front hub seal), 520, 530, 620, 630, 720, 730 (Used on single front wheel and rowcrop models and on models using felt front hub seal), 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230 (Used on single front wheel and rowcrop models).

3.156" OD. 2" ID..  .375" Thick

ABC270 $ 5.50 add to cart      

Front Wheel Felt Retainer

Fits John Deere - AN, ANH (SN: 410000 & up), B, BN, BNH, BO, BR, GN, 50, 60, 70, 620, 630, 720, 730, 1010, 2010, 2510, 3010, 4000, 4020, 4030, 4040, 4230 (with single front wheel), 520, 530, 3020 (Up to SN: 122999 with single front wheel).

Replaces: B89R

1.115 wide, 3.00 OD, 3.443 Flange OD, 2.060 ID, 2.875 Flange ID

Front Wheel Felt Retainer

Fits John Deere - A, AO, AR, BW, BWH, D, DI, G GH, GP, GPO, GW, 50, 60, 70 (Except Standard), 520, 620, 630, 720, 730 (With tricycles (no single wheels).

Replaces: D635R

Measure prior to ordering. 3.160" OD, 3.086" ID. 3.654" Outer ring dia. 1.115" Overall height.

JDS1188 $ 16.95 add to cart JDS1169 $ 12.99 add to cart

Front Wheel Clamp Lock Nut

Fits John Deere - 820 3 cylinder, 830 3 cylinder, B, 50, 520, 530 (with narrow front) , M, MI, MT, 40, 320, 330, 420, 430, 435, 440, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (with regular axle (NOT Heavy Duty).

3/4" - 16 UNF thread. Check thread size before ordering.

ABC254 $ 20.50 add to cart      

Front Wheel Clamp Lock Nut

Fits John Deere - 820 2 cylinder, 830 2 cylinder, A, B (with wide front), D, G, R, 50, 60, 70, 80, 520, 530 (with Roll-O-Matic or wide front), 620, 630, 720, 730, 1020, 1520, 1530, 2030, 2040, 2240, 2440, 2630, 2640 (With heavy duty axle), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430 (Some), 4520, 4620, 4630, 5010, 5020, 6030.

1" - 14 UNF thread. Check thread size before ordering.

ABC255 $ 19.75 add to cart      

Front Wheel Lug Bolt

Fits John Deere - 820 2 cylinder, 820 2 cylinder, [ 820 3 cylinder, 820 3 cylinder, 1020, 1520, 2020, 2030 (EARLY W/1/2" DIA. Lug bolt), A (with hub # A3004R OR A3566R OR F843R), B (SN: 153376 & up), BW (sn: 201000 & up), BWH (SN: 201000 & Up), G (SN: 20278 & up), H, M (sn 43251and up), MI, MT, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010 (EARLY W/1/2" DIA. Lug bolt, & hub #F843R)

Replaces: JD22, AL2329T, JD19R

1/2" - 20 NF, 7/8" thread length, 13/16" hex head

ABC399 $ 2.00 ea. add to cart      

Front Wheel Lug Bolt

Fits John Deere - 210C, 2030, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030 (Front), 820 3 cylinder, 830 3 cylinder, 1020, 1520, 1530, 2020, 2240, 2440 (Front & Rear), 820 3 cylinder, 830 3 cylinder, 1020, 1520, 1530, 2020, 2240, 2440

Replaces: T21544, T23252, AT11920, AA4173R, JD21, JD16R, Serviceable, hex head is larger: JD17

9/16" X 18 UNF thread. 1 1/8" long thread, 7/8" hex head.

ABC397 $ 2.85 ea. add to cart      

Hub Cap - Cast

Fits John Deere - L, LA, MT

Replaces: AL608T, L608T

8.85" Diameter, 1.949" diameter center hole. 3 - 5/16 mount holes.

   
JDS335 $ 109.95 add to cart      

 
view cart
 
Home Page          
Contact Us          

Need Help Ordering Parts?

Call Us:

1-888-839-5778
e mail kuhns@antiquetractorsrus.com


 

More Tractor Parts. Click Here!

We Have Implement, Equipment and Maintenance Parts For all Makes and Models.