Air Cleaner/Pre Cleaner
FDS261 Radiator/Air Cleaner Hose - 2" I.D., 2.25" long
|
FDS260 Air Cleaner Hose - 1-1/2" Inside diameter, 2-7/16" Long
|
FDS1481 Air Cleaner Tube 1-5/8" OD Pipe - Fits Ford 700, 701, 740, 741, 771, 800, 820, 840, 850, 860, 900, 950, 960 (1955 & up gas models w/ 172 ci engines)
|
FDS309 Air Cleaner Tube 1-5/8" O.D. - Fits Ford NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 (Fits following (1953-62) Gas & LP w/ 134 ci engines)
|
FDS1540 Air Cleaner Tube 2" O.D. - Fits Ford: 801, 4000 4-cyl., 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4030 3-cyl., 4121, 4130 3-cyl., 4131, 4140
|
FDS033 Air Cleaner Inner Oil Cup - 1.054" Tall, 4.486" O.D., 3.741" I.D.
|
FDS185 Clip Held Air Cleaner Oil Cup - This air cleaner oil cup measures 5" outside diameter at the lip and is 3-1/8" tall.
|
JDS540 Air Cleaner Outer Oil Cup - Measures 5.750" OD and 5.375" ID and is 3.125" Tall
|
FDS034 Air Cleaner Oil Cup - 4-3/4 O.D., at the lip, 3" tall, 4-15/32" I.D. - is designed for air cleaners using a clamp held cup, Does not fit air cleaners with (2) clips holding the bowl
|
JDS541 Air Cleaner Oil Cup Clamp
|
FDS191 Air Cleaner Gasket - USA Made
|
FDS186 Air Cleaner Spring Clip - Only Spring on the market that has the correct fit
|
FDS280 Air Cleaner Assembly - Fits Ford 700, 740, 800, 820, 840, 850, 860, 900, 940, 950, 960 All Gas only, Late 1954 / 57, - 6-7/8" c.c. mounting hole pattern, 17-1/2" tall
|
FDS210 Air Cleaner Assembly - Fits Ford NAA, Jubilee, 600, 620, 630, 640, 650, 660 - 7-1/4" c.c. bolt pattern, 15-1/2" tall
|
FDS5569 Air Cleaner Funnel
|
ABC422 Oil Bath Air Cleaner Filter Element - Fits most oil bath air cleaners to replace the mesh in the existing air cleaner--Approximately 3" wide X 78" long per bag --- Uses 2 bags for Utility tractors
|
ABC510 Precleaner Assembly - 10-1/2" Bowl
|
ABC484 Small Precleaner Bowl Clear Plastic - 5-1/2" O.D.
|
ABC554 Aluminum Pre-Cleaner Cover With Brass Knurled Nut - 5-1/2" I.D.
|
ABC1824 Pre-Cleaner Cap Assembly - 5-1/2" O.D. - USA Made
|
ABC383 Pre Cleaner Cap Assembly
|
ABC512 Pre-Cleaner Cap Assembly (Includes 7" Bowl) - w/ 2-1/2" I.D. base & 7" bowl ---Measure before ordering - USA Made
|
FDS081 Air Cleaner Clamp - For use with all models listed above with Donaldson air cleaner
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
|
|