ACS5482 Air Cleaner to Carburetor Hose
|
FDS260 Air Cleaner Hose - 1-1/2" Inside diameter, 2-7/16" Long
|
|
ACS5357 Air Cleaner Hose - Fits Allis Chalmers D19 Gas
|
ACS5645 Air Cleaner to Carburetor Hose
|
FDS034 Air Cleaner Oil Cup - 4-3/4 O.D., at the lip, 3" tall, 4-15/32" I.D. - is designed for air cleaners using a clamp held cup, Does not fit air cleaners with (2) clips holding the bowl
|
FDS258 1-3/4" - 2" Hose Clamp - Fits 1-3/4" O.D., To 2" O.D. hoses, 2" I.D.
|
ABC422 Oil Bath Air Cleaner Filter Element - Fits most oil bath air cleaners to replace the mesh in the existing air cleaner--Approximately 3" wide X 78" long per bag --- Uses 2 bags for Utility tractors
|
ABC510 Precleaner Assembly - 10-1/2" Bowl
|
ABC339 Precleaner Bowl - 10-1/2 Top O.D., 4" Tall, fitting models with 3" to 4" inlet
|
ABC484 Small Precleaner Bowl Clear Plastic - 5-1/2" O.D.
|
ABC338 Pre Cleaner Bowl, Plastic, 7" Diameter
|
ABC554 Aluminum Pre-Cleaner Cover With Brass Knurled Nut - 5-1/2" I.D.
|
JDS559 Pre-Cleaner Cover With Brass Nut - 7" diameter metal cover - Fits: ABC338 precleaner bowl and ABC470 and JDS741 precleaner cap assemblies
|
ABC1824 Pre-Cleaner Cap Assembly - 5-1/2" O.D. - USA Made
|
ABC383 Pre Cleaner Cap Assembly
|
ABC512 Pre-Cleaner Cap Assembly (Includes 7" Bowl) - w/ 2-1/2" I.D. base & 7" bowl ---Measure before ordering - USA Made
|
ACS061 Air Cleaner Cap - Inlet Dia: 1-3/4", O.D. of cap = 4", Overall height = 1-1/2"
|
ACS065 Air Cleaner Cap - Inlet Diameter: 1-5/8", Cap OD: 4", Overall height: 1-3/8"
|
ACS226 Air Cleaner Cap - Inlet = 2.275" I.D. Base, O.D. of cap = 4.94" Diameter
|
IHS283 Air Cleaner Cap - 2-1/4" I.D., 2-3/8" O.D.
|
JDS535 Screen With Clip and 2 Springs for Pre-screener - Only fits models listed with 7" dia. Pre-Cleaner Bowl, 5-1/4" Tall, 19-3/8" Long
|
JDS561 Metal Prescreener Without Screen
|
JDS938 Pre-Screener Clip and Spring Kit
|
JDS557 Precleaner Metal Base - ALL DONALDSON PRE-CLEANERS W/3" O.D. PIPE & 7" Dia. Bowl
|
ABC2443 Dust Unloader Valve (Vacuator Valve) for Dry Air Cleaner - 1" I.D.
|
FDS081 Air Cleaner Clamp - For use with all models listed above with Donaldson air cleaner
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|