ACS208 HOSE 1-5/8" O.D. - Fits Allis B, C, CA, G, D10, D12, D14, RC; Fits Massey Harris Pony
|
MHS017 AIR CLEANER TUBE - 1-1/2" O.D., 14-1/2" outer curve length
|
JDS540 Air Cleaner Outer Oil Cup - Measures 5.750" OD and 5.375" ID and is 3.125" Tall
|
ACS115 Air Cleaner Oil Cup (Clip-Style) - 4.495" OD 4.075" ID 2.237" tall
|
FDS034 Air Cleaner Oil Cup - 4-3/4 O.D., at the lip, 3" tall, 4-15/32" I.D. - is designed for air cleaners using a clamp held cup, Does not fit air cleaners with (2) clips holding the bowl
|
JDS541 Air Cleaner Oil Cup Clamp
|
IHS717GK Gasket for Pre-Cleaner Dust Jar - Fits # IHS717
|
ABC422 Oil Bath Air Cleaner Filter Element - Fits most oil bath air cleaners to replace the mesh in the existing air cleaner--Approximately 3" wide X 78" long per bag --- Uses 2 bags for Utility tractors
|
ABC510 Precleaner Assembly - 10-1/2" Bowl
|
IHS717 Donaldson Pre-Cleaner Assembly with Glass Dust Jar - for models listed with a 2" I.D. Base
|
ABC484 Small Precleaner Bowl Clear Plastic - 5-1/2" O.D.
|
ABC554 Aluminum Pre-Cleaner Cover With Brass Knurled Nut - 5-1/2" I.D.
|
ABC383 Pre Cleaner Cap Assembly
|
ABC512 Pre-Cleaner Cap Assembly (Includes 7" Bowl) - w/ 2-1/2" I.D. base & 7" bowl ---Measure before ordering - USA Made
|
MHS019 Air Cleaner Cap - 1.275" to 1.320 Pipe O.D.
|
IHS388 Air Cleaner Cap with Flat Wire
|
IHS727 Pre Cleaner Glass Jar - 3.25" OD thread, 3-7/8" Tall
|
FDS081 Air Cleaner Clamp - For use with all models listed above with Donaldson air cleaner
|
IHS638 Wittek Tower Clamp - fits hoses measuring between 1.815" and 2.000"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS641 2-25/64" - 2-5/8" Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625" - USA Made
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
ABC4172 Worm Drive Hose Clamps - Range: 1-1/2" to 2-1/2", Stainless Steel
|