ABC5880 Starter Drive Assembly Kit
|
1107043 6 Volt Starter Re-Manufactured - 14 Teeth, CCW, Direct Drive - Fits Allis B (1938-1954), C (1940 - 1949), CA (1950-1954)
|
1107096 Starter, Remanufactured 6 Volt - Fits Allis Chalmers B (1955-1957), CA (1955-1958)
|
ACS324 Starter Drive Housing
|
ABC505 Starter Drive (Bendix) Original Spring Style - 14 Teeth Original Style
|
24021BX Solenoid 12 Volt - 4 Terminal Flat Mount, Gas models only
|
15-407 Solenoid 12 Volt - 4 Terminal Saddle Mount, Intermittent Duty
|
1872505 Starter Armature - Fits Allis B, C, CA, D10, D14, IB, WC, WD, WD45, WF; John Deere M, 320, L, LA, 40, 330, 420, 430
|
MIS065 Battery Disconnect Switch - Can also be used to stop battery drain on a tractor in storage. USA MADE
|
ABC4217 Delco Commutator End Housing
|
ABC012 Starter Switch for Delco Starters Manual foot / lever switch --- Saddle mount --- 2 Mounting holes, 0.190" ID, 1-3/8" centers --- --- 3/8" - 16 Threaded battery terminal
|
ACS275 Starter Switch Lever - For "PUSH" rod type starter switch system - USA Made
|
ACS350 Starter Hand Crank With Spinner and Pin - Allis Chalmers - Fits: B, C, CA - USA Made
|
ABC1582 Starter to Switch Cable 16" (Eyelets at Both Ends) - Cable 16-1/4 length, center to center x 3/8" diameter eyelet holes - USA Made
|
188-12002 Cover Band (1-1/4" Wide)
|
ABC507 Starter Drive Spring Only
|
ABC506 Starter Or Solenoid Terminal Repair Stud 5/16" -24
|
ABC508 Starter Or Solenoid Terminal Repair Stud - 5/16-18
|
ABC1203 Delco Starter Commutator (Brush) Band Cover - Stainless Steel 4-1/2" I.D. x 1-3/16" Width - USA Made
|
ABC1207 Delco Generator Commutator (Brush) Band Cover - 4-1/2" I.D. X 1-5/8" width - USA Made
|
ABC4201 Starter Brush & Bushing Kit
|
ABC403 Battery Cable 24" - 24 Inch Ground cable, non-insulated --- Heavy duty straight terminals --- 2 gauge, length = 24" --- Eyelet opening = 7/16" - USA Made
|
ABC407 Battery Cable 10 - 1/4" - Insulated 2 gauge 10-1/2" long Eyelet opening = 3/8" Heavy duty straight terminals - USA Made
|
ABC417 21" Battery Cable - Insulated Heavy duty straight terminals 2 gauge 21" length Eyelet opening = 3/8"
|
ABC415 12" Battery Cable - Heavy Duty 2 gauge Insulated 12" long straight terminals 3/8" eyelet opening - USA Made
|
ABC413 14 -1/2" Battery Cable - Insulated Heavy duty 2 gauge 14-1/2" long 90 degree terminal ends 3/8" eyelet opening - USA Made
|
ABC419 27" Battery Cable - 2 gauge --- length = 27" --- Eyelet opening = 3/8" --- Heavy duty straight terminals - USA Made
|
ABC405 13" Battery Cable - 13" Long 2 Gauge Heavy duty, straight terminals non-insulated - USA Made
|
ABC1175 Ground Cable 14" (Non-Insulated) - 14 inch, 7/16" Eyelet Opening - USA Made
|
ABC411 Battery Cable 9" non-insulated -9" Long, 2 Gauge, Heavy duty - USA Made
|