Brake, Clutch, Differential, Rear Axle & Transmission
CKS6074 Brake Housing, Case Industrial LH/RH
|
|
ABC164 Brake Shoe Lining Set - Fits D17 (SN: 42001 & up), D19, D21, 170, 175, 180, 185, 190, Set includes 2 linings with rivets -1 set for 1 wheel only 1.25" W x 7.25" L
|
ABC3703 Brake Band with Riveted Lining
|
|
ABC438 Case Bonded Brake Disc - 3-1/8" spline inside diameter7" outside diameter24 splines, 4 used per tractor
|
CKS1592 Bonded Brake Disk
|
CKS1601 Disc Brake Linings With Rivets - 6" OD, 3.140" ID., .191" thick
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat - USA Made
|
IHS1136 Disc Brake Actuation Spring - Steel --- 1.095" Overall Length --- 0.825" OD --- 0.110" Wire Diameter
|
ACS3731 Brake Return Spring - 0.088" wire diameter, 0.525" to 0.666" O.D., 1.389" overall length
|
CKS3707 Brake Plate Assembly - 6.500" O.D., 17 splines
|
ABC4219 Brake Band Hardware Kit - 2 kits used per side
|
CKS3710 Brake Actuating Drum With Riveted Lining - 1.560" wide, 7.250" O.D.
|
ABC561 Actuating Spring For Disc Brakes - 0.105 wire diameter 1.275 o/a length; 0.809 o.d.-----4 used per tractor
|
IHS823 Disc Brake Actuating Spring - 1.209" overall length, 0.105" wire dia., 0.761" OD
|
ABC1225 Disc Brake Ball - 7/8" Diameter steel ball (0.875")
|
ABC2713 1 inch Disc Brake Ball
|
CKS2647 Brake Disc Ball - 211-15 steel brake ball (5/8")
|
CKS105 Brake Dust Cover Boot - 4.590" overall length.1.000" O.D.0.136" Wire diameter
|
|
CKS4115 Brake Master Cylinder - 2-7/16" center to center on the mounting holes
|
IHS4120 Brake Master Cylinder
|
ABC3203 Bull Pinion Shaft Bearing Retainer Oil Seal - 2.250 ID, 3.256 OD, 0.375 Wide
|
IHS3084 Rear Axle Shaft / Bull Pinion Seal - 1.875" I.D., 2.875" O.D., 0.313" wide
|
ABC1628 Transmission Front Input Main Shaft Seal - 1.187" I.D., 2.004" O.D., 0.250" Width
|
ABC3212 Differential Brake Pinion Shaft Seal - 2.625" I.D., 3.628" O.D., 0.375" wide
|
ABC3203 Differential Brake Shaft Carrier Seal 2.250 ID, 3.256 OD, 0.375 Wide
|
ABC1937 Throw-out Bearing - 2.260" inside diameter. 3.650" outside diameter. 0.800" thickness.
|
|
|