Brake, Clutch, Differential, Rear Axle & Transmission
JDS3333 Riveted Brake Shoe Assembly - A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} - Overall outer curved length: 10-1/2",
|
JDS3355 Riveted Brake Shoe Assembly (2-piece set) - 1 pair per wheel, Overall outer curved length: 12-1/4", Lining length: 11-5/8", Width: 2-1/4"
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS685 Brake Lining Kit- 11-3/4" Outer Curvature2-1/4" Wide
|
JDS683 Brake Lining Kit - Fits A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} 10-1/2" outer curve length - MH 101 Sr, 102 Sr, 30, 30K, 44, 44-61-3/4" wide
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
JDS3523 Brake Hardware Kit - 7 piece kit
|
JDS878 Oil Seal For Brakes - 1.500" I.D., 1.987" O.D., 0.313" wide
|
|
JDS2003 Rear Axle Felt Seal - 3.969" I.D., 5.438" O.D., 0.500" wide, check axle casting # as 50, 520 & 530 came with different axle length
|
JDS1060 Rear Axle Felt Retainer - 3.605" I.D. 5.533" O.D., Check axle casting # before ordering, as 2 different lengths of axles on 50, 520 & 530
|
ABC2026 Transmission / Rear Oil Drain Plug Washer Gasket
|
JDS545 Pulley Clutch Disc With Bonded Lining - 0.393" thick
|
JDS538 Clutch Facing - 10" OD 6-3/4" ID 0.150" thick
|
JDS020 Clutch Drive Disc - 0.265" thick
|
JDS1599 Clutch Pulley Cover Retaining Spring W/ Rivet - 2.579" Long, 1.040" Width, 0.263" Hole I.D.
|
JDS880 Clutch Disc Adjusting Spring - 1.915" long and the wire thickness measures 0.120"
|
JDS887 Clutch Lever Pivot Bolt - 0.750" O.D. to 0.625" O.D., 4-1/4" length
|
MIS1134 Clutch Adjusting Nut - 9/16"-18 NF Grade 5 Zinc, Slotted Hex Nut
|
JDS4240 Clutch Belt Pulley Bushing
|
JDS1048 Clutch Operating T-Bolt - 9/16" diameter and 5-9/16" overall length.
|
JDS2581 Clutch Dog Pin - 0.793" diameter, 2.500" usable length
|
Price: Low Stock - Call for Avaibility
JDS3372 Clutch Dog Toggle - 1.999" overall length
|
JDS867 Clutch Dog - Forged Just Like Original
|
JDS586 Gear Shift Knob - Bakelite, 1.71" Dia., 3/8"-24 UNF Threads
|
JDS2314 2nd and 5th Sliding and Reverse Gear - 18 Teeth
|
JDS5036 Lever Snap Rings - Fits various levers
|
|
|