Brake, Clutch, Differential, Rear Axle & Transmission
JDS6051 Brake Adjusting Pin - MADE IN THE USA
|
ABC6026 Clutch Alignment Tool - USA Made
|
JDS6173 Rear Axle Inner Felt Retainer
|
JDS5462 Flywheel Ring Gear
|
|
JDS6864 Clutch Spring - USA Made
|
JDS6636 Brake Adjusting Screw - USA Made
|
JDS3350 Riveted Brake Shoe Assembly (2-piece set) - Fits R, 520, 530, 80, Row-Crop and Standard: 620, 630, 70 - 1 pair per wheel, Overall outer curved length: 10-1/2", Width: 2-1/4
|
JDS3355 Riveted Brake Shoe Assembly (2-piece set) - 1 pair per wheel, Overall outer curved length: 12-1/4", Lining length: 11-5/8", Width: 2-1/4"
|
JDS5492 Brake Disc - Fits John Deere (820, 830 3 Cyl Only), 1020, 1030, 1120, 1520, 1530, 1630, 2020, 2030, 2040, 2240, 2440
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS665 Brake Lining Kit - Fits R, 520, 530, 620, 630 (NON HI-CROP), 70, 80; - 10-1/2" Outer Curvature 2-1/4" Wide
|
JDS685 Brake Lining Kit- 11-3/4" Outer Curvature2-1/4" Wide
|
JDS1887 Belt Pulley Brake Lining Kit - 2-1/4" wide x 5" long
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
JDS893 Brake Pedal Bushing - 0.690" I.D., 0.750" O.D., 1.215"
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
JDS960 Brake Return Spring - 4-5/8" Overall length
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
JDS3523 Brake Hardware Kit - 7 piece kit
|
ABC3209 Brake Shaft Oil Seal - Fits John Deere 820, 830 & 840 (all 2 cylinder) - 1.750" I.D., 2.254" O.D. 0.350" wide
|
JDS2003 Rear Axle Felt Seal - 3.969" I.D., 5.438" O.D., 0.500" wide, check axle casting # as 50, 520 & 530 came with different axle length
|
JDS1060 Rear Axle Felt Retainer - 3.605" I.D. 5.533" O.D., Check axle casting # before ordering, as 2 different lengths of axles on 50, 520 & 530
|
ABC2026 Transmission / Rear Oil Drain Plug Washer Gasket
|
JDS1027 Clutch Disc w/ Riveted Lining- lining outside diameter measures 9.250". The thickness measures 0.372". Has (3) 5/8" diameter holes to slide over the R1869R pins When assembling, the discs slide OVER the Pins NOT the T-bolts.
|
JDS1025 Clutch Disc Facing - 9.250 O.D. .156 THICK
|
8225518 Clutch Release Bearing -3.750" OD
|
836202 Clutch Pilot Bearing - 1.375" OD
|
JDS3054 Clutch Pulley Brake Cover Gasket (clutch fork bearing cover gasket) - 10-3/8" overall length, 2-7/8" wide, 4 bolt holes.
|
JDS887 Clutch Lever Pivot Bolt - 0.750" O.D. to 0.625" O.D., 4-1/4" length
|
|
|