Brake, Clutch, Differential, Rear Axle & Transmission
IHS5719 48646D Transmission (Frame) Cover Gasket, Farmall H, Super H, McCormick W4, Super W4 -USA Made
|
IHS5722 Pulley Drive Opening Cover Gasket - USA Made
|
IHS5725 Drive Shaft Bearing Cage Gasket - USA Made
|
IHS5726 Gear Shift Poppet Spring, 41058D - USA Made
|
IHS5728 Drive Shaft Bearing Retainer Gasket - USA Made
|
IHS5731 Countershaft Front Bearing Retainer Gasket - USA Made
|
IHS5947 Rear Axle Carrier Gasket - Fits H, HV, Super H, O4, OS4, W4, Super W4 - USA Made
|
IHS6380 Gear Spring Lever Spring - USA Made
|
|
IHS5738 Transmission Countershaft Bushing
|
IHS5644 Bull Pinion Shaft Ball Bearing
|
IHS6651 Ball Bearing - Case, International Tractors
|
IHS4439 Bull Pinion and Brake Pinion Seal - Fits International / Farmall C, (H, HV SN: 73940 & up) and (W-4, O-4, OS-4 SN: 2239 & up)
|
IHS612 Lined Brake Band - Brake rod unpins from lining.2" wide
|
ABC428 Brake Riveted Brake Disc - 1-7/8" 10 spline shaft ID5-5/8" diameter0.525" thick
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat - USA Made
|
IHS826 Disc Brake Adjusting Bolt - 3/8" - 24UNF x 4-1/4" NF SPECIAL THREAD
|
IHS3067 Brake Pedal Pawl Pin
|
IHS688 Rubber Brake Boot and Dust Cover - FOR DISC BRAKES
|
IHS3058 Brake Lock Assist Attachment - bolts to the hydraulic pump control rod bracket under the light bar
|
ABC561 Actuating Spring For Disc Brakes - 0.105 wire diameter 1.275 o/a length; 0.809 o.d.-----4 used per tractor
|
ABC1225 Disc Brake Ball - 7/8" Diameter steel ball (0.875")
|
JDS1222 Brake Shaft Oil Seal - 1.125" I.D., 1.832" O.D., .0250" wide
|
IHS687 Brake Pedal Return Spring, Clutch Pedal Return Spring - Overall length: 8-1/8"
|
ABC131 Inner Rear Axle Seal or Belt Pulley Seal
|
ABC1562 Rear Axle Oil Seal - 2.500" I.D., 3.548" O.D., .438" Width
|
ABC3196 Bull Pinion Shaft Bearing Retainer Oil Seal - 2.313" I.D. x 3.505" O.D. x 0.313" width
|
IHS3084 Rear Axle Shaft / Bull Pinion Seal - 1.875" I.D., 2.875" O.D., 0.313" wide
|
IHS4448 Rear Axle Felt Seal
|
|
|