Brake, Clutch, Differential, Rear Axle & Transmission
IHS1375 Clutch and Brake Pedal Shaft - Bare metal --- 22.56" Long, 1.130" diameter
|
IHS1376 Clutch and Brake Pedal Shaft - Bare metal --- 22.20" Long, 1.130" Diameter
|
IHS4442 Rear Axle Felt Seal - USA Made
|
ABC4706 Bull Pinion Shaft Bearing Retainer
|
ABC4696 Bull Pinion Shaft Bearing Cage O-Ring
|
IHS3836 Rear Axle Bearing Retainer Cap Gasket - USA Made
|
IHS3004 New Clutch Kit - 10-1/2" O.D., 10 splines, 1-1/4" spline I.D., 9 spring pressure plate.
|
IHS2984 Clutch Kit - 10" O.D., 1-1/4" Spline I.D., 10 splines
|
IHS3002 Farmall H Rebuilt Pressure Plate - 10-1/2" O.D., 9 springs
|
ABC2974 Rebuilt Pressure Plate - 10" O.D. and 6 springs
|
IHS1438 New Woven Clutch Disc. - 10" OD --- 10 Spline --- 1-1/4" Spline ID
|
IHS2999 New Woven Clutch Disc - 10-1/2" O.D., 10 splines, 1-1/4" spline I.D.
|
ABC1928 Clutch Throw-out Bearing - 2.060" inside diameter. 3.215" outside diameter. 0.810" thickness. - USA Made
|
IHS1155 Clutch Release Throw-Out Bearing Carrier - For replaceable throw-out bearing Can update older tractors with graphite style (non-turning) bearing
|
ABC2937 Clutch Pilot Bearing - This is a sealed bearing. 0.984" I.D., 2.047" O.D. and is 0.590" wide.
|
ABC3113 Clutch Alignment Tool - 10 spline, 1-1/4" spline O.D., 0.970" O.D. pilot, and is 5-1/2" overall length
|
IHS873 Clutch Pedal Return Spring - 0.073" wire diameter, 3.850" overall length, 0.620" body diameter.
|
IHS882 Clutch Pedal Return Spring - OVERALL LENGTH = 6"
|
IHS4372 Clutch Joint Rubber Washer Retainer Ring
|
IHS266 Gear Shift Knob - Can also be used as a reverser knob. 0.375" Hole dia.
|
IHS2480 Rubber Gear Shift Boot - 4-3/4" tall
|
IHS187 4th and 5th Speed Sliding Gear - 18 and 31 teeth
|
IHS3178 4th & 5th Speed Sliding Gear - 18 & 35 Teeth
|
IHS3185 Constant Mesh Gear - 55 Teeth
|
IHS3314 Premium Shift Lever Repair Pin Kit - USA Made
|
IHS981 Shift Lever Repair Pin Kit
|
ABC2008 Transmission Counter & Brake Shaft Oil Seal - 1.375" ID, 2.110 OD, 0.315" Wide
|
IHS3084 Transmission Drive Shaft Oil Seal - Fits IH Super H, Super HV, O4, OS4, Super W4, W4, I4 - 1.875" I.D., 2.875" O.D., 0.313" wide
|
IHS2316 Clutch Joint Rubber Washer - 1.125" OD, 0.269" thick, 0.569" ID
|
IHS3183 Transmission Driving Shaft - 18 & 35 Teeth
|
|
|