Brake, Clutch, Differential, Rear Axle & Transmission
ABC262 Lined Brake Bands - 2" Wide, 1 lined brake band per wheel
|
ABC453 Riveted Brake Disc - 12 Spline6-1/2" Dia2-1/4" Spline ID0.500" thick4 used per tractor
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat
|
IHS828 Disc Brake Adjusting Bolt - 7/16" - 20 UNF x 4-1/2"
|
IHS3067 Brake Pedal Pawl Pin
|
IHS690 Rubber Brake Boot Dust Cover - FOR DISC BRAKES
|
IHS5800 Snap Ring - Fits Cub & Loboy on Belt Pull Drive Housing, M, MD< Super M, Super MD, Super MDTA, MDV, Super MTA, MV on Trans Main Shaft Bearing, O6, ODS6, OS6, Super W6, Super W6TA, W6, Super WD6, WD6 on Trans Main Shaft Pilot Bearing
|
IHS3062 Brake Lock Assist Attachment - bolts to the hydraulic pump control rod bracket under the light bar
|
IHS3066 Brake Lock Assist Attachment - bolts to the hydraulic pump control rod bracket under the light bar
|
ABC561 Actuating Spring For Disc Brakes - 0.105 wire diameter 1.275 o/a length; 0.809 o.d.-----4 used per tractor
|
IHS823 Disc Brake Actuating Spring - 1.209" overall length, 0.105" wire dia., 0.761" OD
|
ABC1225 Disc Brake Ball - 7/8" Diameter steel ball (0.875")
|
JDS1222 Brake Shaft Oil Seal - 1.125" I.D., 1.832" O.D., .0250" wide
|
ABC3201 R/H reduction gear carrier transmission brake seal - 2.875" I.D., 3.756" O.D., 0.438" wide
|
IHS687 Brake Pedal Return Spring, Clutch Pedal Return Spring - Overall length: 8-1/8"
|
ABC3203 Bull Pinion Shaft Bearing Retainer Oil Seal - 2.250 ID, 3.256 OD, 0.375 Wide
|
ABC1503 International Oil Seal - 1.625" ID, 2.441" OD, 0.312" wide
|
ABC3201 Bull Pinion Shaft Bearing Retainer Oil Seal - 2.875" I.D., 3.756" O.D., 0.438" wide
|
IHS4692 Bull Pinion And Brake Shaft Seal
|
ABC3203 Differential Brake Shaft Carrier Seal 2.250 ID, 3.256 OD, 0.375 Wide
|
IHS1371 Clutch and Brake Pedal Shaft - Bare metal --- 24.94" Long, 1.130" Diameter
|
IHS1372 Clutch and Brake Pedal Shaft - Bare metal -- 25.12" Long, 1.130" Diameter
|
IHS4442 Rear Axle Felt Seal
|
|
|
IHS4445 Rear Axle Bearing Retainer Cap Gasket
|
IHS1884 New Clutch Kit - 11" diameter, 10 splines (1-1/2" spline I.D.
|
357299K Clutch Kit - 12", Single Stage
|
405300KA Clutch Kit with Aetna Release Bearing - Fits Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986 all with 12" 6 Pad Heavy Duty Single Stage
|
|
|