Brake, Clutch, Differential, Rear Axle & Transmission
IHS6228 Clutch Joint Rubber Washer, Farmall -Fits A, AV, SUPER A, SUPER A-1, SUPER AV, SUPER AV-1, B, BN, C, SUPER C, 100, 130, 140, 200, 230, 240, 404 USA MADE
|
IHS5726 Gear Shift Poppet Spring, 41058D - USA Made
|
IHS627 Clutch Dust Cover (Release Bearing Grease Hole Cover) - 2.025" O.D.
|
IHS231 Lined Brake Band - Fits 7" brake drum1-3/4" wide
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat - USA Made
|
IHS701 Brake Return Spring - OVERALL LENGTH = 7"
|
ABC3298 Final Drive Axle Seal
|
ABC1512 Final Drive Oil Seal - 1.750" I.D., 2.632" O.D., .500" Width
|
ABC131 Inner Rear Axle Seal or Belt Pulley Seal
|
ABC1503 International Oil Seal - 1.625" ID, 2.441" OD, 0.312" wide
|
ABC2689 Final Drive Differential Bearing Oil Seal - 2.378" O.D., 1.531" I.D., 0.500" wide
|
IHS3024 Rear Axle Housing Oil Pan Gasket
|
IHS4460 4-Pc. Final Drive Gasket Kit
|
IHS958 New 9 inch Clutch Kit - 9" diameter. 3 levers. 6 springs. Pressure plate fingers are 0.500" width
|
IHS2681 Woven Clutch Disc - 9" O.D., 6 splines, 1-1/4" spline diameter
|
ABC1928 Clutch Throwout Bearing - 2.060" inside diameter. 3.215" outside diameter. 0.810" thickness.
|
IHS1155 Clutch Release Throw-Out Bearing Carrier - For replaceable throw-out bearing Can update older tractors with graphite style (non-turning) bearing
|
IHS3264 Clutch Pilot Bushing - ID: 0.875", OD: 1.125", Length: 0.995" - USA Made
|
IHS3709 Clutch Alignment Tool - 6 spline 1.250" spline O.D. 0.865" pilot O.D. 5.875" overall length
|
IHS3468 Clutch Release Sleeve Guide, Bushing - 1.470" O.D. 5.067" long 1.280"
|
IHS3665 Clutch Release Yoke - 7-5/8" overall length
|
IHS266 Gear Shift Knob - Can also be used as a reverser knob. 0.375" Hole dia.
|
ABC3437 Ball Bearing - Transmission, Clutch & Misc.
|
355740R1 Differential Bearing Retainer Oil O-Ring
|
IHS2354 Transmission Gasket Kit
| |
|
|