Brake, Clutch, Differential & Transmission
JDS5014 Fulcrum Ball Socket Cover
|
JDS3033 Clutch Pulley Brake Cover Gasket - 11-1/2" long, 2-13/16" wide and has 4 bolt holes
|
JDS586 Gear Shift Knob - Bakelite, 1.71" Dia., 3/8"-24 UNF Threads
|
JDS3333 Riveted Brake Shoe Assembly - A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} - Overall outer curved length: 10-1/2",
|
JDS683 Brake Lining Kit - Fits A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} 10-1/2" outer curve length - MH 101 Sr, 102 Sr, 30, 30K, 44, 44-6
1-3/4" wide
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
JDS1887 Belt Pulley Brake Lining Kit - 2-1/4" wide x 5" long
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat
2-1/8" high throat
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth
1/8" diameter rivet punch
5/16" anvil
|
|
JDS3472 19/64" Clutch Head Socket (3/8" drive)
|
JDS1017 John Deere A, G Clutch Slider Disc - 9-7/8" diameter X 0.375" thick
|
JDS1023 John Deere G Clutch Drive Disc
|
JDS545 Pulley Clutch Disc With Bonded Lining - 0.393" thick
|
JDS882 Clutch Pulley Cover Retaining Spring With Rivet
|
JDS880 Clutch Disc Adjusting Spring - 1.915" long and the wire thickness measures 0.120"
|
JDS1042 Clutch Operating T-Bolt - 9/16" diameter and 7-5/16" overall length.
|
JDS1626 Clutch Pressure Plate Spring Washer - 0.572" ID, 0.937" OD, 0.035" Thick, Steel Spring
|
JDS538 Clutch Facing - 10" OD 6-3/4" ID 0.150" thick
|
JDS1902 Oversized Clutch Pin - 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes
|
JDS891 Clutch Lever Pivot, Brake or Pedal Bushing - 0.750" ID, 0.815" OD, 1.373" long
|
JDS887 Clutch Lever Pivot Bolt - 0.750" O.D. to 0.625" O.D., 4-1/4" length
|
MIS1134 Clutch Adjusting Nut - 9/16"-18 NF Grade 5 Zinc, Slotted Hex Nut
|
JDS867 Clutch Dog - Forged Just Like Original
|
JDS2581 Clutch Dog Pin - 0.793" diameter, 2.500" usable length
|
JDS3372 Clutch Dog Toggle - 1.999" overall length
|
JDS1705 John Deere Gear Shift Ball
|
JDS1060 Rear Axle Felt Retainer - 3.605" I.D. 5.533" O.D., Check axle casting # before ordering, as 2 different lengths of axles on 50, 520 & 530
|
|
|