Brake, Clutch, Differential, Rear Axle & Transmission
JDS6051 Brake Adjusting Pin - MADE IN THE USA
|
JDS6173 Rear Axle Inner Felt Retainer
|
|
|
|
JDS6636 Brake Adjusting Screw - USA Made
|
JDS6970 Stud - John Deere - USA Made
|
JDS3350 Riveted Brake Shoe Assembly (2-piece set) - Fits R, 520, 530, 80, Row-Crop and Standard: 620, 630, 70 - 1 pair per wheel, Overall outer curved length: 10-1/2", Width: 2-1/4
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS665 Brake Lining Kit - Fits R, 520, 530, 620, 630 (NON HI-CROP), 70, 80; - 10-1/2" Outer Curvature 2-1/4" Wide
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat - USA Made
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
JDS878 Oil Seal For Brakes - 1.500" I.D., 1.987" O.D., 0.313" wide
|
|
ABC3362 Belt Pulley Gearbox Seal - 2.125 ID, 2.879 OD, 0.438 Wide
|
JDS2003 Rear Axle Felt Seal - 3.969" I.D., 5.438" O.D., 0.500" wide, check axle casting # as 50, 520 & 530 came with different axle length
|
JDS1060 Rear Axle Felt Retainer - 3.605" I.D. 5.533" O.D., Check axle casting # before ordering, as 2 different lengths of axles on 50, 520 & 530
|
JDS1062 Rear Axle Felt Retainer - 3.033" I.D., 4.727" O.D., Check axle casting number before ordering, 50, 520 & 530 have different axle lengths
|
JDS1984 Rear Axle Felt Seal - Fits A, (50, 520 & 530 with 88" Tread") Check axle casting # before ordering 3.375" I.D., 4.656" O.D., 0.438" wide
|
ABC2026 Transmission / Rear Oil Drain Plug Washer Gasket
|
JDS6890 Sheet Metal, Implement, & Rear Axle Housing Bolt Hole Cork Kit - Fits all 2-cylinder tractors
|
JDS605 Clutch Disc Facing - Fits John Deere B (sn 201000 and up), 50, 520, 530
|
|
JDS663 Pulley Clutch Disc - Fits John Deere B SN 201000 & up, 50, 520, 530
|
JDS803 Clutch Slider Disc - 0.250" thick and 6.988" outside diameter
|
JDS1028 Clutch Disc Adjusting Spring - mounts to the outer cast iron adjusting disc.
|
JDS882 Clutch Pulley Cover Retaining Spring With Rivet
|
GP-08H1103KIT Flywheel Bolts, lock washers, nut (6 pcs)
|
JDS3042 Clutch Pulley Brake Cover Gasket - 9-5/8" long, 3" wide and has 4 bolt holes
|
|
|