Brake, Clutch, Differential, Rear Axle & Transmission
JDS6051 Brake Adjusting Pin - MADE IN THE USA
|
JDS6173 Rear Axle Inner Felt Retainer
|
|
|
|
JDS6655 Transmission Cover Gasket - USA Made
|
Gear Shift Quadrant Gasket - USA Made - John Deere Tractors Fits: A,
60,
620,
630,
AO,
AR
|
JDS6636 Brake Adjusting Screw - USA Made
|
JDS3333 Riveted Brake Shoe Assembly (2-piece set)
|
JDS3350 Riveted Brake Shoe Assembly (2-piece set) - Fits R, 520, 530, 80, Row-Crop and Standard: 620, 630, 70 - 1 pair per wheel, Overall outer curved length: 10-1/2", Width: 2-1/4
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS665 Brake Lining Kit - Fits R, 520, 530, 620, 630 (NON HI-CROP), 70, 80; - 10-1/2" Outer Curvature 2-1/4" Wide
|
JDS683 Brake Lining Kit - Fits A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR}; Serviceable for MH 101 Sr, 102 Sr, 30, 30K, 44, 44-6
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth1/8" diameter rivet punch5/16" anvil
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat2-1/8" high throat - USA Made
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
JDS960 Brake Return Spring - 4-5/8" Overall length
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
JDS878 Oil Seal For Brakes - 1.500" I.D., 1.987" O.D., 0.313" wide
|
|
|
ABC3362 Belt Pulley Gearbox Seal - 2.125 ID, 2.879 OD, 0.438 Wide
|
ABC1565 Rear Axle Seal on International and John Deere - On Case Disc Brake Oil Seal - 2.750" I.D., 3756" O.D., .438 Width
|
JDS2003 Rear Axle Felt Seal - 3.969" I.D., 5.438" O.D., 0.500" wide, check axle casting # as 50, 520 & 530 came with different axle length
|
JDS1758 Rear Axle Felt Seal - 3.500" I.D., 4.683" O.D., 0.425" wide USA MADE
|
JDS1060 Rear Axle Felt Retainer - 3.605" I.D. 5.533" O.D., Check axle casting # before ordering, as 2 different lengths of axles on 50, 520 & 530
|
ABC2026 Transmission / Rear Oil Drain Plug Washer Gasket
|
GP-A5609R Gasket, Rockshaft Housing Cover
|
JDS545 Pulley Clutch Disc With Bonded Lining - 0.393" thick
|
JDS538 Clutch Facing - 10" OD 6-3/4" ID 0.150" thick
|
JDS478 Clutch Drive Disc - 1.881" thick
|
JDS880 Clutch Disc Adjusting Spring - 1.915" long and the wire thickness measures 0.120"
|
|
|