Brake, Clutch, Differential & Transmission
ABC1565 Oil Seal - 2.750" I.D., 3756" O.D., .438 Width
|
ABC3362 Belt Pulley Gearbox Seal - 2.125 ID, 2.879 OD, 0.438 Wide
|
ABC1501 Oil Seal - 1.125" I.D., 1.565" O.D., 0.250" wide
|
ABC2026 Washer Gasket - Can be used as engine oil drain plug washer, reduction cover oil plug washer and transmission / rear end drain plug washer (1.002" hole I.D. 1.257" O.D. 0.058" thick)
|
JDS586 Gear Shift Knob - Bakelite, 1.71" Dia., 3/8"-24 UNF Threads
|
JDS665 Brake Lining Kit - Fits R, 520, 530, 620, 630 (NON HI-CROP), 70, 80; - 10-1/2" Outer Curvature
2-1/4" Wide
|
JDS3333 Riveted Brake Shoe Assembly - A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} - Overall outer curved length: 10-1/2",
|
JDS3350 Riveted Brake Shoe Assembly (2-piece set) - Fits R, 520, 530, 80, Row-Crop and Standard: 620, 630, 70 - 1 pair per wheel, Overall outer curved length: 10-1/2", Width: 2-1/4
|
JDS683 Brake Lining Kit - Fits A, G, 60, Following High-Crops Only: 60, 620, 630, 70, 720, 730, Orchards: 60, 620, {for differential brakes not rear wheel brakes: AR} 10-1/2" outer curve length - MH 101 Sr, 102 Sr, 30, 30K, 44, 44-6
1-3/4" wide
|
JDS702 Brake Shoe Spring - 4-1/8" OVERALL LENGTH
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS3513 Brake Hardware Kit- 10 piece kit
|
JDS878 Oil Seal For Brakes - 1.500" I.D., 1.987" O.D., 0.313" wide
|
MIS2547 Deep Throat Brake Rivet Tool - 3-3/8" Deep Throat
2-1/8" high throat
|
MIS1131 Brake Riveting Tool - 1-1/4" throat depth
1/8" diameter rivet punch
5/16" anvil
|
|
JDS021 John Deere Clutch Slider Disc - 0.247" thick
|
JDS545 Pulley Clutch Disc With Bonded Lining - 0.393" thick
|
JDS882 Clutch Pulley Cover Retaining Spring With Rivet
|
JDS3046 Clutch Pulley Brake Cover Gasket - 10-3/8" long, 3-1/4" wide and has 4 bolt holes
|
JDS478 Clutch Drive Disc - 1.881" thick
|
JDS880 Clutch Disc Adjusting Spring - 1.915" long and the wire thickness measures 0.120"
|
JDS1046 John Deere 60, 620, 630 Clutch Operating T-Bolt - 9/16" diameter and 6-7/16" overall length.
|
JDS1626 Clutch Pressure Plate Spring Washer - 0.572" ID, 0.937" OD, 0.035" Thick, Steel Spring
|
JDS538 Clutch Facing - 10" OD 6-3/4" ID 0.150" thick
|
JDS1902 Oversized Clutch Pin - 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes
|
JDS891 Clutch Lever Pivot, Brake or Pedal Bushing - 0.750" ID, 0.815" OD, 1.373" long
|
JDS887 Clutch Lever Pivot Bolt - 0.750" O.D. to 0.625" O.D., 4-1/4" length
|
MIS1134 Clutch Adjusting Nut - 9/16"-18 NF Grade 5 Zinc, Slotted Hex Nut
|
JDS867 Clutch Dog - Forged Just Like Original
|
|
|