Carburetor
ABC6786 Carburetor Drain Plug
|
ABC223 Carburetor, New Zenith Universal Replacement - 2-5/16" to 2-3/8" CC stud holes (Because of the smaller diameter studs that are included) Throttle Shaft Length = 4.88" Has 1-1/8" throttle bore
|
ABC220 Marvel Schebler Economy Carburetor Repair Kit - This kit contains repair parts that fits a multitude of number of Marvel Schebler carburetors.
|
ACS3556 Premium Carburetor Repair Kit - Fits Allis Chalmers B, C, IB, RC (all with Marvel Schebler TSX154 and TSX305 carburetors
|
ACS3569 Premium Carburetor Repair Kit - Fits Allis Chalmers CA & D14 with TSX670 & TSX701 Carburetors
|
ACS3559 Premium Carburetor Repair Kit - Fits Allis CA (with Marvel Schebler TSX470, TSX486 carburetors
|
ABC1346 Zenith Carburetor Repair Kit - This kit contains repair parts for a multitude of Zenith Carburetors
|
ABC232 Complete Carburetor Repair Kit for Zenith - Fits Allis Chalmers B, C, IB & RC with 10698A, 10902A, 10903A, 9705, 9804, 10697, 10698 Zenith Carburetors
|
ACS1385 Complete Zenith Carburetor Repair Kit - Fits Allis Chalmers CA with 11141, 11142, 225621 & 225622 Zenith Carburetor
|
ABC036 Carburetor Float For small bowl Marvel Schebler carbs. The dimension from center of pin hinge to end of pontoon = 2.375 length
|
ABC190 Zenith Carburetor Float - 2.170" at widest point overall length, 1.826" overall height
|
ABC230 Marvel Schebler Viton Needle Float Valve - Viton Needle and seat helps stop carb flooding. The orifice measures.080" diameter. 3/8"-27 thread - USA Made
|
ABC3233 Carburetor Gasket Kit - Fits Marvel Schebler Small Bowl Carburetor, The overall length of the bowl gasket is 4-5/16" - USA Made
|
ABC408 Carburetor to Manifold Mounting Gasket - Fits Marvel Schebler TSX241A, TSX241B, TSX241C, TSX33, TSX38, TSX420, TSX428, TSX500, TSX580, TSX83, 2-3/8" - 2-7/16" slotted bolt holes 1-1/8" center hole Approx. 0.062" thick - USA Made
|
ABC1171 Choke Butterfly Disc
|
ABC1159 Throttle Butterfly Disc for Marvel Schebler Carburetor - USA Made
|
ABC1182 Choke Butterfly Disc 1-5/16" OD*** FOR MARVEL SCHEBLER CARBURETORS
|
T819 Throttle Body Repair Bushing - For 1/4" shaft only, Install with sealant
|
ABC513 Throttle Body Repair Bushing - Repairs worn throttle bodies using 1/4" throttle shafts, For small bowl Marvel Schebler carburetors - USA Made
|
ABC297 Carb Elbow Strainer Assembly - Fits various Marvel Schebler Models. Also fits tractors with the Carter UT series carburetors. Must have internal threads, Used with flair fitting not compression fitting Male end
|
ABC1156 Marvel Schebler Carburetor Main Nozzle
|
ABC557 Zenith Main Carburetor Nozzle - USA Made
|
REP4082 Marvel Schebler TSX & DLTX Carburetor Service Manual Reprint
| |
|
|