IHS6348 Carburetor (New Zenith Style)
|
IHS420 New Marvel Schebler Carburetor - mounting studs measure 2-3/8" center to center. The throttle body throat measures 1-1/16" diameter. The choke air horn (air inlet) measures 1-1/2" OD. The fuel inlet measures 1/8" NPT.
|
IHS905 New O.E.M. Zenith Carburetor - USA Made
|
ABC223 Carburetor, New Zenith Universal Replacement - 2-5/16" to 2-3/8" CC stud holes (Because of the smaller diameter studs that are included) Throttle Shaft Length = 4.88" Has 1-1/8" throttle bore
|
ABC220 Marvel Schebler Economy Carburetor Repair Kit - This kit contains repair parts that fits a multitude of number of Marvel Schebler carburetors.
|
ABC467 Basic Marvel Schebler Carburetor Repair Kit - Fits Models listed with TSX156, TSX157, TSX319 and TSX333 Carburetors
|
IHS3611 Premium Carburetor Repair Kit - Fits Models listed with TSX319 Carburetor, IH # 352047R01
|
ABC1346 Zenith Carburetor Repair Kit - This kit contains repair parts for a multitude of Zenith Carburetors
|
ABC147 Basic Zenith Carburetor Repair Kit - Fits International Super A & Super C with Zenith Carburetor # 11115, IH # 355485R91
|
ABC179 Complete Zenith Carburetor Repair Kit - Fits Models listed with Zenith Carburetor #'s 52499Da, 52499DB, 52499DC, 52499DD, 9752
|
ABC231 Basic Carburetor Repair Kit - Fits Carter Carburetors UT27015, UT652, UT733S, UT734S, UT771A, UT771S, UT795S, UT925A, UT925S, Fits Carter Carburetors with upper throttle body # : O-653
|
ABC3933 Economy Carb Repair Kit - Many Carter carburetors are missing the tag and can not be identified. This kit has all the bowl gasket variations along with both style needles and seats fitting all Carter carburetors.
|
ABC036 Carburetor Float For small bowl Marvel Schebler carbs. The dimension from center of pin hinge to end of pontoon = 2.375 length
|
ABC522 Carburetor Float - Fits all Carter carburetors with cast iron throttle bodies
|
ABC190 Zenith Carburetor Float - 2.170" at widest point overall length, 1.826" overall height
|
ABC230 Marvel Schebler Viton Needle Float Valve - Viton Needle and seat helps stop carb flooding. The orifice measures.080" diameter. 3/8"-27 thread - USA Made
|
ABC3233 Carburetor Gasket Kit - Fits Marvel Schebler Small Bowl Carburetor, The overall length of the bowl gasket is 4-5/16" - USA Made
|
ABC408 Carburetor to Manifold Mounting Gasket - Fits Marvel Schebler TSX241A, TSX241B, TSX241C, TSX33, TSX38, TSX420, TSX428, TSX500, TSX580, TSX83, 2-3/8" - 2-7/16" slotted bolt holes 1-1/8" center hole Approx. 0.062" thick - USA Made
|
IHS1386 Throttle Shaft - For Carter carburetor with cast iron upper body. 0.249" OD, 2.475" Machined length
|
T819 Throttle Body Repair Bushing - For 1/4" shaft only, Install with sealant
|
ABC513 Throttle Body Repair Bushing - Repairs worn throttle bodies using 1/4" throttle shafts, For small bowl Marvel Schebler carburetors - USA Made
|
ABC297 Carb Elbow Strainer Assembly - Fits various Marvel Schebler Models. Also fits tractors with the Carter UT series carburetors. Must have internal threads, Used with flair fitting not compression fitting Male end
|
IHS1124 Carburetor Elbow With Strainer Assembly - fits the models listed when they are equipped with a 5/16" O.D. fuel line. 1/8" male threads Fits Carter, Marvel Schebler & Zenith carburetors - USA MADE
|
ABC564 Zenith Main Jet Adjusting Needle Assembly -Used as an adjustable load nozzle assembly to eliminate the electric solenoid when used on Zenith 13783 carburetors.
|
ABC1156 Marvel Schebler Carburetor Main Nozzle
|
IHS966 Carburetor Elbow With Strainer Assembly - will fit models listed when they are equipped with a 1/4" O.D. fuel line.
|
IHS2709 Choke Lever with Screw
|
REP4082 Marvel Schebler TSX & DLTX Carburetor Service Manual Reprint
| | |