Carburetor
MFS138 New Carburetor - Mounting studs are 2-3/8" center to center. The throttle bore throat size is 1-1/16" diameter. The choke air horn (air inlet) measures 1-1/2" OD. The fuel inlet measures 1/8" NPT. The carb mounting gasket is included.
|
ABC161 Basic Marvel Schebler Carburetor Repair Kit - Fits Ferguson TE20, TO20 and TO30 with TSX312, TSX361 and TSX361A Marvel Schebler Carburetors
|
ABC220 Marvel Schebler Economy Carburetor Repair Kit - This kit contains repair parts that fits a multitude of number of Marvel Schebler carburetors.
|
MFS3652 Premium Carburetor Repair Kit - Fits Ferguson TO30 with TSX458 Marvel Schebler Carburetor
|
MFS1901 Complete Carburetor Repair Kit - Fits Ferguson TO30 with TSX458 Marvel Schebler Carburetor
|
ABC1346 Zenith Carburetor Repair Kit - This kit contains repair parts for a multitude of Zenith Carburetors
|
ABC1903 Carter Basic Carburetor Repair Kit - This kit includes throttle shaft, needle and seat valve, float lever pin, miscellaneous plugs and screws, throttle shaft seal and gaskets
|
ABC3933 Economy Carb Repair Kit - Many Carter carburetors are missing the tag and can not be identified. This kit has all the bowl gasket variations along with both style needles and seats fitting all Carter carburetors.
|
ABC036 Carburetor Float For small bowl Marvel Schebler carbs. The dimension from center of pin hinge to end of pontoon = 2.375 length
|
ABC190 Zenith Carburetor Float - 2.170" at widest point overall length, 1.826" overall height
|
ABC230 Marvel Schebler Viton Needle Float Valve - Viton Needle and seat helps stop carb flooding. The orifice measures.080" diameter. 3/8"-27 thread
|
ABC3233 Carburetor Gasket Kit - Fits Marvel Schebler Small Bowl Carburetor, The overall length of the bowl gasket is 4-5/16"
|
ABC408 Carburetor to Manifold Mounting Gasket - Fits Marvel Schebler TSX241A, TSX241B, TSX241C, TSX33, TSX38, TSX420, TSX428, TSX500, TSX580, TSX83, 2-3/8" - 2-7/16" slotted bolt holes 1-1/8" center hole Approx. 0.062" thick
|
ABC410 Carburetor To Manifold Mounting Gasket - This gasket measures 2-15/16" from center of one bolt hole to the center of the other bolt hole. The center hole itself measures 1-5/8".
|
ABC1182 Choke Butterfly Disc 1-5/16" OD*** FOR MARVEL SCHEBLER CARBURETORS
|
T819 Throttle Body Repair Bushing - For 1/4" shaft only, Install with sealant
|
ABC513 Throttle Body Repair Bushing - Repairs worn throttle bodies using 1/4" throttle shafts, For small bowl Marvel Schebler carburetors
|
ABC297 Carb Elbow Strainer Assembly - Fits various Marvel Schebler Models. Also fits tractors with the Carter UT series carburetors. Must have internal threads, Used with flair fitting not compression fitting Male end
|
REP4082 Marvel Schebler TSX & DLTX Carburetor Service Manual Reprint
| | |
|
|