IHS6176 12 Volt Alternator Conversion Kit
|
IHS6179 12 Volt Alternator Conversion Kit
|
IHS6642 Mini Alternator Conversion Kit
|
ABC153 Economy 6 Volt Voltage Regulator - for a saddle mount and 4 terminals (lights, battery, field and armature), for a Premium Voltage Regulator see 231-12000
|
ABC152 Economy 6 Volt External Voltage Regulator - There are 4 terminals (lights, battery, field and generator), For a Premium Voltage Regulator see 231-12002
|
231-12000 Premium Mechanical 6V Regulator - saddle mount and 4 terminals (lights, battery, field and armature) for an Economy Voltage Regulator see ABC153
|
231-12002 Premium 6 Volt Ext Regulator - for a flat base for mounting with 4 terminals (lights, battery, field and generator), For an Economy Voltage Regulator see ABC152
|
230-12071 12 Volt Electronic Voltage Regulator Adjustable - Mounts directly to alternator, converting to a 1 wire output. Great for replacing that bulky mechanical regulator
|
IHS1258 Saddle Mount Generator Cut Out Relay 6 Volt This is a 2 terminal positive ground cut out that replaces the 3 terminal original cut out, only fits tractors equipped with lights & 3 brush generator
|
IHS1701 International 2 Piece Adjustable Generator Pulley This generator pulley measures 4.129" Diameter. Made with ductile iron. Includes set screw and lock nut.
|
IHS141 Generator Belt 1/2" x 33-1/4" (all with Delco generator)
|
IHS235 Generator Belt 1/2" x 30-1/4"
|
ABC188 Voltage Regulator Conversion Kit Use with ABC153 voltage regulator when replacing Delco Remy Cutouts 1116766, 1116807, 1116809 1116816, 5839, 5851, and 5894; and updating your generator system*** - USA Made
|
IHS1246 Alternator Bracket - Used to mount ABC418 Alternator
|
ABC4164 6 Volt Generator Bearing, Brush & Bushing Kit - Fits models with Delco 3 brush generators, Used on 6 volt generators only
|
ABC4175 Generator Bearing, Brush & Bushing Kit - For models using Delco 3 brush generators
|
ABC104 - Generator Belt - Fits IH models listed with water pump (1/2" x 26-3/4")
|
ABC1426 Alternator Pulley 1/2" for Delco 10SI - 0.670" shaft diameter Round hole, not keyed 3-3/16" pulley O.D. 1/2" belt width
|
ABC2315 Alternator Pulley for Denso 100211-1660 Alternator --3" OD, 5/8" belt width, 0.587" ID, 1.437" O/A length - USA Made
|
ABC418 12-Volt One Wire Alternator Converts 6V to 12V --- Simple 1 wire alternator hook up
|
ABC495 Alternator Pulley 5/8" for Delco 10SI - 0.670" shaft diameter Round hole, not keyed 2-1/2" pulley O.D. 5/8" belt width
|
IHS1246BELT Alternator Belt 1/2" x 30"
|
ABC404 Universal Alternator Bracket Kit - This alternator mounting kit is used when switching from a generator to an alternator.
|
IHS1246 Alternator Bracket Kit - Belt included is not long enough for the 300 or for the 350.
|
IHS829 Alternator Bracket Kit For use with the ABC418 alternator. It is advisable to also buy the ABC495 pulley to get the proper width, 1/2", for the belt as ABC418 is equipped with a 5/8" pulley.
|
ABC529 Universal Top Adjusting Bracket For Alternator Or Generator This is a universal bracket, it is not a direct bolt on for any applications.
|
ABC533 Diode With 2 Spade Plug - USA Made
|
ABC511 Distributor/Generator/Starter Tag for 6-Volt Delco Remy - USA Made
| | |