Charging System (Generators & Alternators)
A-1100401 Generator, Delco, REMAN - Fits Cub, Cub LoBoy, 140, 3616, 600, 656, 700, 706, 806
|
A-1100394 RE-MFG. GERNERATOR - Fits Cub, Cub LoBoy, 460, 560, 606, 660
|
356936R91 RE-MFG. GENERATOR - Fits A, AV, B, C, Cub, Cub LoBoy, H, M, Super A, Super C, Super H, Super M, W4, W6, 200, 400 (all with 1.75" Shaft)
|
IHS6192 12 Volt Alternator Conversion Kit
|
IHS099 - International / Farmall Cub (Generator Belt) - 1/2" x 20"
|
ABC100 - Generator Belt - 1/2" x 22" Will NOT fit 154, 184 or 185.
|
ABC185 Economy 12 Volt Regulator - This external voltage regulator has 4 terminals (lights, battery, field, and generator). For a Premium Voltage Regulator see 231-12001
|
ABC153 Economy 6 Volt Voltage Regulator - for a saddle mount and 4 terminals (lights, battery, field and armature), for a Premium Voltage Regulator see 231-12000
|
ABC152 Economy 6 Volt External Voltage Regulator - There are 4 terminals (lights, battery, field and generator), For a Premium Voltage Regulator see 231-12002
|
231-12000 Premium Mechanical 6V Regulator - saddle mount and 4 terminals (lights, battery, field and armature) for an Economy Voltage Regulator see ABC153
|
231-12002 Premium 6 Volt Ext Regulator - for a flat base for mounting with 4 terminals (lights, battery, field and generator), For an Economy Voltage Regulator see ABC152
|
230-12071 12 Volt Electronic Voltage Regulator Adjustable - Mounts directly to alternator, converting to a 1 wire output. Great for replacing that bulky mechanical regulator
|
IHS1258 Saddle Mount Generator Cut Out Relay 6 Volt This is a 2 terminal positive ground cut out that replaces the 3 terminal original cut out, only fits tractors equipped with lights & 3 brush generator
|
ABC188 Voltage Regulator Conversion Kit Use with ABC153 voltage regulator when replacing Delco Remy Cutouts 1116766, 1116807, 1116809 1116816, 5839, 5851, and 5894; and updating your generator system***
|
ABC4164 6 Volt Generator Bearing, Brush & Bushing Kit - Fits models with Delco 3 brush generators, Used on 6 volt generators only
|
ABC4175 Generator Bearing, Brush & Bushing Kit - For models using Delco 3 brush generators
|
ABC3551 Mini 35 Amp 12 Volt Negative Ground Alternator with Pulley - 35 Amp1 wire hook upWorks with magneto or distributor ignitions.4-1/2" housing diameter2-3/4" pulley O.D.1/2" belt widthFor negative ground systems only
|
ABC1426 Alternator Pulley For ABC418 0.670" shaft diameter Round hole, not keyed 3-3/16" pulley O.D. 1/2" belt width
|
ABC2315 Alternator Pulley --3" OD, 5/8" belt width, 0.587" ID, 1.437" O/A length
|
ABC418 63 Amp One Wire Alternator With Pulley Converts 6V to 12V --- Simple 1 wire alternator hook up
|
ABC495 Alternator Pulley Only 0.670" shaft diameter Round hole, not keyed 2-1/2" pulley O.D. 5/8" belt width
|
ABC404 Universal Alternator Mounting Kit This alternator mounting kit is used when switching from a generator to an alternator.
|
IHS2340 Farmall Cub Alternator Bracket Kit Must use with ABC3551 alternators only. Can re-use your existing belt (the belt will ride over the pulley but still work)
|
ABC529 Universal Top Adjusting Bracket For Alternator Or Generator This is a universal bracket, it is not a direct bolt on for any applications.
|
ABC533 Diode With 2 Spade Plug
|
ABC511 Blank Starter Generator Tag
| |
|
|