Charging System (Generators & Alternators)
IHS6176 12 Volt Alternator Conversion Kit
|
ABC476 Tachometer Drive Assembly - Drives off of the rear of the generator. Includes 14 and 43 tooth gears
|
ABC3443 IH Generator Belt 300, 350 - 1/2" x 33-1/8"
|
24039BX Solenoid, 6 Volt - 3 Terminals, Curved Mount
|
ABC185 Economy 12 Volt Regulator - This external voltage regulator has 4 terminals (lights, battery, field, and generator). For a Premium Voltage Regulator see 231-12001
|
ABC152 Economy 6 Volt External Voltage Regulator - There are 4 terminals (lights, battery, field and generator), For a Premium Voltage Regulator see 231-12002
|
231-12002 Premium 6 Volt Ext Regulator - for a flat base for mounting with 4 terminals (lights, battery, field and generator), For an Economy Voltage Regulator see ABC152
|
231-12004 Premium Voltage Regulator 12 Volt - For 3 terminals, 7 to 9 Amps, (battery, generator, and field on rear)
|
230-12071 12 Volt Electronic Voltage Regulator Adjustable - Mounts directly to alternator, converting to a 1 wire output. Great for replacing that bulky mechanical regulator
|
IHS1701 International 2 Piece Adjustable Generator Pulley This generator pulley measures 4.129" Diameter. Made with ductile iron. Includes set screw and lock nut.
|
IHS1699 Generator Pulley Finally a new ductile iron generator pulley is available to finish your restoration! made to fit the models with a 1-1/4" exposed generator shaft. This pulley measures 3" outside diameter and 2.104" in overall length.
|
ABC188 Voltage Regulator Conversion Kit Use with ABC153 voltage regulator when replacing Delco Remy Cutouts 1116766, 1116807, 1116809 1116816, 5839, 5851, and 5894; and updating your generator system*** - USA Made
|
IHS1246 Alternator Bracket - Used to mount ABC418 Alternator
|
ABC4175 Generator Bearing, Brush & Bushing Kit - For models using Delco 3 brush generators
|
ABC1426 Alternator Pulley 1/2" for Delco 10SI - 0.670" shaft diameter Round hole, not keyed 3-3/16" pulley O.D. 1/2" belt width
|
ABC2315 Alternator Pulley for Denso 100211-1660 Alternator --3" OD, 5/8" belt width, 0.587" ID, 1.437" O/A length - USA Made
|
ABC418 12-Volt One Wire Alternator Converts 6V to 12V --- Simple 1 wire alternator hook up
|
ABC495 Alternator Pulley 5/8" for Delco 10SI - 0.670" shaft diameter Round hole, not keyed 2-1/2" pulley O.D. 5/8" belt width
|
ABC404 Universal Alternator Bracket Kit - This alternator mounting kit is used when switching from a generator to an alternator.
|
ABC529 Universal Top Adjusting Bracket For Alternator Or Generator This is a universal bracket, it is not a direct bolt on for any applications.
|
ABC533 Diode With 2 Spade Plug - USA Made
|
ABC511 Distributor/Generator/Starter Tag for 6-Volt Delco Remy - USA Made
| | |
|
|