Cooling
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
ABC1396 Radiator Cap - 7 PSI, for a 1-inch tall filler Neck, 2.330" OD, 2.000" tang to tang, 1.367" Tall
|
ACS209 Radiator Pressure Cap - 4 PSI (for pressurized systems), 2.239" Inner cap I.D., 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area 4 PSI (for pressurized systems)
|
ABC008 Radiator Cap - 4 psi pressurized systems. 1.500" diameter radiator neck., 2.330" O.D., 1.500" I.D., 1.35" tall. 2.00" tang to tang length, .440" tang width
|
IHS4877 Lower Radiator Hose Fits Case Skid Steers 1840, 1845C
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
ABC1898 160 Degree Thermostat
|
71011901 Thermostat 180 Degrees- Fits models listed with Perkins Engines, 2.125" diameter, non-bypass
|
CKS108 Water Pump, New Not Rebuilt - With gasket 2-3/4" impeller dia., Will not fit early VAC tractors with threaded impeller shaft
|
CKS118 Water Pump With Gasket - Fits late SN: 148B & 159 gas engines, and 188, 207 C.I. diesel engines, 3.125 impeller O.D. For gas applications verify 3.125" diameter before ordering
|
ABC4524 Water Pump - Fits Allis 170 175 all Diesel, MF 165, 175, 180, 275, 50C, 60 all diesel
|
MFS2123 Water Pump To Support Casting Gasket
|
CKS6076 Water Pump Backplate Gasket - USA Made
|
FDS1453 - Fan Belt / Power Steering - Fits Ford 3 Cylinder models listed with a Generator And Massey Ferguson 150, 255, 265, 275 w/ Perkins Diesel & Alternators - 1/2" wide x 53-1/4" Long
|
MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
ABC4172 Worm Drive Hose Clamps - Range: 1-1/2" to 2-1/2", Stainless Steel
|
ABC4180 Worm Drive Hose Clamps - Range: 1" to 3", Stainless Steel
|
ABC4192 Worm Drive Hose Clamps - Range: 2-3/4" to 3-3/4", Stainless Steel
|
ABC4188 Worm Drive Hose Clamps - Range: 2-1/2" to 3-1/2", Stainless Steel - USA Made
|
|
|