Cooling
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
MHS072 Radiator - 18-1/2" overall height including tanks, 14-1/2" width including frames, 4-1/2" thick frame, 1-1/2" outlet dia.
|
ABC1396 Radiator Cap - 7 PSI, for a 1-inch tall filler Neck, 2.330" OD, 2.000" tang to tang, 1.367" Tall
|
ABC406 Radiator Hose - Fits Allis WC, WD, WD45, WF (as a Lower Radiator Hose), Fits MF TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 230, 235 (as an Upper Hose)
|
IHS1993 Radiator Cap - 7 PSI, 2.84" O.D., 2.490" tang to tang length, fits 2.050" neck I.D., Cap reads "tighten, remove slowly"
|
IHS337 Radiator Cap - Non Pressurized Systems, 2.108" tang to tang, 2.806" I.D., 2.886" O.D., .398" tang width, 1.845" inside center dia.
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ABC008 Radiator Cap - 4 psi pressurized systems. 1.500" diameter radiator neck., 2.330" O.D., 1.500" I.D., 1.35" tall. 2.00" tang to tang length, .440" tang width
|
MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
ABC055 Upper Radiator Hose - Fits: Allis Chalmers D17 (Diesel) WC, WD, WD45, WF Ford - Fits: 2N, 8N, 9N Ford - Fits: 2N, 8N, 9N, 440
|
ABC4522 Upper Radiator Hose - Fits International up to SN: JJE0910719: 3230, 4210, 4230. International with AC: 585, 595, 685, 695, 885
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
ABC115 Thermostat - Temperature = 180 Degrees F, 2.115" O.D.
|
71011901 Thermostat 180 Degrees- Fits models listed with Perkins Engines, 2.125" diameter, non-bypass
|
ABC009 Fan Belt - 5/8" x 36-1/2"
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
JDS325 Wire Hose Clamp - 2.550" Maximum, 2.40" Minimum
|
JDS293 OE Style Wire Hose Clamp - 3" maximum
|
JDS352 4 Inch Wire Hose Clamp - 4.065" Maximum, 3.820" Minimum
|
JDS568 OE Style Wire Hose Clamp - 3.330" maximum, 3" minimum
|
JDS566 OE Style Wire Hose Clamp - 2-3/4" maximum, 2.60" Minimum
|
JDS570 Wire Hose Clamp - 2.280" maximum, 2.100" minimum
|
IHS638 Wittek Tower Clamp - fits hoses measuring between 1.815" and 2.000"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS640 2 11/16" - 2 1/2" Wittek Tower Clamp (Hose Clamp) - USA Made
|
IHS636 3/4" - 1" Wittek Tower Clamp (Hose Clamp) - Fits hoses measuring .775" and 1.013" - USA Made
|
IHS642 Wittek Tower Clamp - fits hoses measuring between 2.350" and 2.765"
|
IHS643 Wittek Tower Clamp - fits hoses measuring between 2.685" and 2.995"
|
IHS637 Wittek Tower Clamp - fits hoses measuring between 1.687" and 1.780"
|
IHS641 2-25/64" - 2-5/8" Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625" - USA Made
|
|
|