Cooling
|
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
JDS515 Radiator Cap - 5 PSI, 3.185" O.D., 1.975" tang to tang length, .575" tang width, 1.480" inside center dia.
|
JDS751 John Deere Radiator Cap - 7 PSI, 4.362" O.D., 2.00" tang to tang length, .440" tang width, 1.500" inside center dia.
|
JDS4579 Lower Radiator Hose - Fits John Deere 3010, 3020, 4000, 4010, 4020
|
JDS4765 Upper Radiator Hose - Fits John Deere 3010, 3020, 4000, 4010, 4020
|
JDS4549 Lower Radiator Hose - Fits John Deere (820, 830 both 3 cyl), (1010, 1020 both Diesel), 1030, 1120, 1520, 1530,. 1630, 2020 Diesel, 2030, 2040, 2130 (SN 50000 & Up), 2150, 2155 (SN Up to 621999), 2240, 2440, 2630, 2640
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
ABC1086 180 Degree Thermostat - 2.5" OD
|
ABC5444 Thermostat 180 Degrees
|
JDS955 Lower Thermostat Housing
|
JDS4593 Thermostat Housing To Thermostat Cover Gasket
|
JDS4551 Thermostat Housing Mounting Gasket
|
JDS2783 Water Pump With Gasket New - Fits John Deere 3010, 3020, 4000, 4010, 4020 and 4230 (all gas). This pump is designed to be used with a cast iron pulley Only
|
JDS2791 Water Pump With Gasket Fits John Deere 1010 Gas Only, New, includes pulley & gasket
|
JDS2807 John Deere 1010 & 2010 Water Pump - New, with a single groove pulley & gasket
|
JDS762 Water Pump New - Fits Diesels only without A/C, using a stamped sheet metal pulley, includes backing plate & gasket
|
A-AR45332 Water Pump w/ Gasket
|
|
|
JDS2785 Water Pump Pulley Spacer - in order to gain housing pulley clearance, when stamped steel pulley is used instead of cast iron pulley
|
ABC010 Generator Belt - 5/8" wide x 45-1/2" long
|
FDS1458 Fan Belt - Fits Ford models with an alternator; Fits Ford 3010, 3020, 4010, 4020 (Gas & LP Models) - 17/32" x 54" long
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
JDS325 Wire Hose Clamp - 2.550" Maximum, 2.40" Minimum
|
JDS293 OE Style Wire Hose Clamp - 3" maximum
|
JDS352 4 Inch Wire Hose Clamp - 4.065" Maximum, 3.820" Minimum
|
JDS568 OE Style Wire Hose Clamp - 3.330" maximum, 3" minimum
|
JDS566 OE Style Wire Hose Clamp - 2-3/4" maximum, 2.60" Minimum
|
JDS570 Wire Hose Clamp - 2.280" maximum, 2.100" minimum
|
IHS636 3/4" - 1" Wittek Tower Clamp (Hose Clamp) - Fits hoses measuring .775" and 1.013" - USA Made
|
|
|