Cooling
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
R4160 Radiator Mounting Kit
|
|
IHS1993 Radiator Cap - 7 PSI, 2.84" O.D., 2.490" tang to tang length, fits 2.050" neck I.D., Cap reads "tighten, remove slowly"
|
IHS731 7PSI Pressurized Radiator Cap - 4.000" O.D. including tangs, 2.500" tang to tang, .390" tang width, 2.040" inside center dia.
|
IHS723 Pressurized Radiator Cap - 7 PSI, 4.000" O.D., 1.985" tang to tang, .575" tang width, 1.485" inside center dia., includes gaskets & fits radiator with 1.5" Neck I.D., exact as original
|
IHS925 Winged Radiator Drain Cap - 3/8" pipe thread, has "IH" stamped into it, includes gasket, Cast Iron with ZINC Plating - USA Made
|
IHS5660 Upper Radiator Hose - Fits Super A, Super C, 100, 130, 200 and 230
|
IHS217 Water Pump - New, includes mounting gasket & pulley
|
IHS2081 Farmall Fan Drive Pulley Assembly - Fits models listed with Water Pump - 3.125 C.C. Fan Bolts, 12-24 UNC Fan Screws, 4.379" OD Rear Pulley, 4.062" OD Front Pulley
|
IHS5601 Water Pump Body Gasket
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
IHS922 Winged Water Block Drain Plug - 3/8" pipe threads, Stamped "IH" and "45314DC", Cast Iron with ZINC Plating
|
ABC102 Fan & Generator Belt - Fits IH models listed with Water Pump (11/16" x 34-1/4")
|
IHS636 3/4" - 1" Wittek Tower Clamp (Hose Clamp) - Fits hoses measuring .775" and 1.013" - USA Made
|
IHS643 Wittek Tower Clamp - fits hoses measuring between 2.685" and 2.995"
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
ABC4172 Worm Drive Hose Clamps - Range: 1-1/2" to 2-1/2", Stainless Steel
|
ABC4180 Worm Drive Hose Clamps - Range: 1" to 3", Stainless Steel
|
ABC4192 Worm Drive Hose Clamps - Range: 2-3/4" to 3-3/4", Stainless Steel
|
ABC4188 Worm Drive Hose Clamps - Range: 2-1/2" to 3-1/2", Stainless Steel - USA Made
|
|
|