ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
IHS925 Winged Radiator Drain Cap - 3/8" pipe thread, has "IH" stamped into it, includes gasket, Cast Iron with ZINC Plating - USA Made
|
IHS731 7PSI Pressurized Radiator Cap - 4.000" O.D. including tangs, 2.500" tang to tang, .390" tang width, 2.040" inside center dia.
|
IHS723 Pressurized Radiator Cap - 7 PSI, 4.000" O.D., 1.985" tang to tang, .575" tang width, 1.485" inside center dia., includes gaskets & fits radiator with 1.5" Neck I.D., exact as original
|
FDS261 Radiator/Air Cleaner Hose - 2" I.D., 2.25" long
|
IHS251 Upper Radiator Hose - Fits 140, 240, 404, 424, 444
|
IHS4913 Radiator Hose (elbow to water pump) - Fits 240 & 340 Farmall & International Models
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
IHS898 Water Pump - New, For gas & LP only, Includes back plate gasket only & has 2 threaded ports
|
IHS5601 Water Pump Body Gasket
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
IHS636 3/4" - 1" Wittek Tower Clamp (Hose Clamp) - Fits hoses measuring .775" and 1.013" - USA Made
|
IHS643 Wittek Tower Clamp - fits hoses measuring between 2.685" and 2.995"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS642 Wittek Tower Clamp - fits hoses measuring between 2.350" and 2.765"
|
IHS641 2-25/64" - 2-5/8" Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625" - USA Made
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
ABC4172 Worm Drive Hose Clamps - Range: 1-1/2" to 2-1/2", Stainless Steel
|
ABC4180 Worm Drive Hose Clamps - Range: 1" to 3", Stainless Steel
|
ABC4192 Worm Drive Hose Clamps - Range: 2-3/4" to 3-3/4", Stainless Steel
|
ABC4188 Worm Drive Hose Clamps - Range: 2-1/2" to 3-1/2", Stainless Steel - USA Made
|
ABC4184 Worm Drive Hose Clamps - Range: 2-1/4" to 3-1/4", Stainless Steel - USA Made
|