Cooling
ACS114 Pressurized System Radiator - 18-1/2" High, 18" wide 1-3/8" deep, Fan shroud opening 17-1/8"
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
ACS183 Fan Blade - 16-7/8" O.D. tip to tip, 3-7/8" blade width, 1" pilot hole, 1-1/4" c-c bolt holes, 5/16" bolt hole Dia
|
ABC1396 Radiator Cap - 7 PSI, for a 1-inch tall filler Neck, 2.330" OD, 2.000" tang to tang, 1.367" Tall
|
ACS209 Radiator Pressure Cap - 4 PSI (for pressurized systems), 2.239" Inner cap I.D., 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area 4 PSI (for pressurized systems)
|
IHS337 Radiator Cap - Non Pressurized Systems, 2.108" tang to tang, 2.806" I.D., 2.886" O.D., .398" tang width, 1.845" inside center dia.
|
ABC008 Radiator Cap - 4 psi pressurized systems. 1.500" diameter radiator neck., 2.330" O.D., 1.500" I.D., 1.35" tall. 2.00" tang to tang length, .440" tang width
|
ABC055 Upper Radiator Hose - Fits: Allis Chalmers D17 (Diesel) WC, WD, WD45, WF Ford - Fits: 2N, 8N, 9N Ford - Fits: 2N, 8N, 9N, 440
|
ABC406 Radiator Hose - Fits Allis WC, WD, WD45, WF (as a Lower Radiator Hose), Fits MF TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 230, 235 (as an Upper Hose)
|
ABC1086 180 Degree Thermostat - 2.5" OD
|
ACS1571 Thermostat Gasket -models with 201 CI, 226 CI gas or LP engines. --- Cork finish
|
ACS1219 Thermostat Housing
|
ACS229 New Water Pump - With Gasket
|
ACS5622 Water Pump Gasket
|
ABC010 Generator Belt - 5/8" wide x 45-1/2" long
|
ABC059 - Allis Chalmers WC, & WF Ford Golden Jubilee, Jubilee, NAA & 8N - *5/8" x 40", For Tractors With Generator/Alternator Mounted On LEFT Side as sitting in the seat
|
ACS172 Radiator or Fuel Cap
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
FDS258 1-3/4" - 2" Hose Clamp - Fits 1-3/4" O.D., To 2" O.D. hoses, 2" I.D.
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
|
|