IHS6932 Radiator Hose Kit
|
IHS890 Radiator - Un-Pressurized System, 20-1/2" overall height, 16-1/2 tank width, Copper Core, has 2" upper & lower hose outlets
|
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
IHS3884 Radiator Grill Fastener Screw - Exact as original
|
IHS925 Winged Radiator Drain Cap - 3/8" pipe thread, has "IH" stamped into it, includes gasket, Cast Iron with ZINC Plating - USA Made
|
IHS142 Fan Assembly - Fits models listed w/o water pump - 15 1/2" Overall fan diameter, 4" Fan pulley Dia., 3 5/8" Generator Pulley Dia.
|
IHS337 Radiator Cap - Non Pressurized Systems, 2.108" tang to tang, 2.806" I.D., 2.886" O.D., .398" tang width, 1.845" inside center dia.
|
FDS261 Radiator/Air Cleaner Hose - 2" I.D., 2.25" long
|
IHS217 Water Pump - New, includes mounting gasket & pulley
|
IHS2081 Farmall Fan Drive Pulley Assembly - Fits models listed with Water Pump - 3.125 C.C. Fan Bolts, 12-24 UNC Fan Screws, 4.379" OD Rear Pulley, 4.062" OD Front Pulley
|
IHS5616 Water Pump Gasket Kit
|
ABC101 Fan Belt International/Farmall A, B, C Super A - all with out water pump - 11/16" x 32-1/4"
|
ABC102 Fan & Generator Belt - Fits IH models listed with Water Pump (11/16" x 34-1/4")
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
IHS636 3/4" - 1" Wittek Tower Clamp (Hose Clamp) - Fits hoses measuring .775" and 1.013" - USA Made
|
IHS643 Wittek Tower Clamp - fits hoses measuring between 2.685" and 2.995"
|
IHS638 Wittek Tower Clamp - fits hoses measuring between 1.815" and 2.000"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS640 2 11/16" - 2 1/2" Wittek Tower Clamp (Hose Clamp) - USA Made
|
IHS642 Wittek Tower Clamp - fits hoses measuring between 2.350" and 2.765"
|
IHS637 Wittek Tower Clamp - fits hoses measuring between 1.687" and 1.780"
|
IHS641 2-25/64" - 2-5/8" Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625" - USA Made
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|