Cooling
ACS128 Pressurized Radiator - 14-3/4" Height, 15" wide, 2-1/4" depth, Copper Core, These are not overall dimensions
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
ABC455 Radiator Mounting Pad - 1/4" thick, 2" square rubber universal radiator mounting pad fits most tractors with bottom stud
|
ABC1396 Radiator Cap - 7 PSI, for a 1-inch tall filler Neck, 2.330" OD, 2.000" tang to tang, 1.367" Tall
|
ACS209 Radiator Pressure Cap - 4 PSI (for pressurized systems), 2.239" Inner cap I.D., 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area 4 PSI (for pressurized systems)
|
ABC008 Radiator Cap - 4 psi pressurized systems. 1.500" diameter radiator neck., 2.330" O.D., 1.500" I.D., 1.35" tall. 2.00" tang to tang length, .440" tang width
|
ACS208 HOSE 1-5/8" O.D. - Fits Allis B, C, CA, G, D10, D12, D14, RC; Fits Massey Harris Pony
|
ACS192 Lower Water Pipe - Metal, 1-1/4" O.D. X 10"
|
ABC052 Thermostat, 160 Degree (included gasket fits Ford models only) - 160 degree low temperature
|
ABC1898 160 Degree Thermostat
|
IHS913 Thermostat 160 Degrees - 2.600" Length, 2.510" Flange Diameter Pointed end goes down when installed
|
ACS6052 Water Pump Mounting Gasket - Fits Allis B, IB, C, CA, D10, D12, D14, RC
|
ACS227 New Water Pump With Gasket, 5/8" belt width - Fits Allis B, C, CA, D10, D12, D14, D15, IB, RC
|
ACS6055 Water Pump Gasket, Pump to Plate
|
ABC009 Fan Belt - 5/8" x 36-1/2"
|
ACS172 Radiator or Fuel Cap
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|
ABC4147 Worm Drive Hose Clamps - Range: 7/16" to 1", Stainless Steel
|
ABC4158 Worm Drive Hose Clamps - Range 1/2" to 1-1/4", Stainless Steel - USA Made
|
ABC4151 Worm Drive Hose Clamps - Range: 1/2" to 1-1/16", Stainless Steel - USA Made
|
ABC4155 Worm Drive Hose Clamps - 3/8" to 3/4" I.D., Stainless Steel - USA Made
|
ABC4169 Worm Drive Hose Clamps - Range: 1-1/4" to 2-1/4", Stainless Steel - USA Made
|
ABC4165 Worm Drive Hose Clamps - Range: 1" to 2", Stainless Steel
|
ABC4142 Worm Drive Hose Clamps - Range 3/8" to 7/8", Band width, Stainless Steel - USA Made
|
ABC4176 Worm Drive Hose Clamps - Range: 1-3/4" to 2-3/4", Stainless Steel - USA Made
|
ABC4172 Worm Drive Hose Clamps - Range: 1-1/2" to 2-1/2", Stainless Steel
|
ABC4180 Worm Drive Hose Clamps - Range: 1" to 3", Stainless Steel
|
ABC4192 Worm Drive Hose Clamps - Range: 2-3/4" to 3-3/4", Stainless Steel
|
|
|