Electrical System Parts
ABC016 Ammeter Gauge - Fits 2" diameter hole, Threaded Terminal Type
|
ABC2238 Ammeter (Amp) Gauge
|
ABC109 30-30 Ammeter Gauge - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter Gauge - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
IHS1837 Ammeter Gauge (60-0-60)
|
IHS395 International Ammeter Gauge
|
IHS418 International Harvester Ammeter Gauge
|
IHS527 Ammeter Gauge - Fits 2" diameter hole
|
ABC082 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
IHS1666 Oil Pressure Gauge With Studs (0 - 45 Psi) - with 1/8" male pipe threads
|
IHS452 Dash Mounted Oil Pressure Gauge 0 to 75 psi - For models listed before 1946 with 1/8" male pipe threads
|
IHS454 Dash Mounted Oil Pressure Gauge 0 to 75 psi - For models listed 1947 and later - with 1/8" male pipe threads
|
IHS502 International Dash Mounted Oil Pressure Gauge 0 to 75 psi - Fits T340, T5, TD340, TD5, 240, [ 300, 350, 400, 450 (Gas / Dsl) ], 330, 340, 3514, 3616, 3800, 3850, [ 600, 650 (Gas/LP) ], Crawler: 500 - 1/8" male pipe threads
|
ABC2353 Oil Gauge Adapter Fitting - 1/8" pipe female to 1/4" tubing female
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
ABC1593 Water Temperature Gauge - Dash mounted, not illuminated, 2" dia., 60" lead, 5/8"-18 U.F. end w/ 1/2" NPT pipe bushing, Probe dia. 0.374", length is 1-3/16"
|
ABC239 Water Temperature Gauge - Dash mounted, 110 degrees to 230 degrees, Includes 72" long heavy duty capillary tube, 5/8" - 18 UF thread with 1/2" NPT pipe bushing,
|
IHS453 Farmall Water Temperature Gauge - with a 16" lead, 5/8"-18 UNF. end w/ 1/2" NPT pipe bushin
|
IHS528 Water Temperature Gauge - for tractors 1939-46, 16 inch lead 5/8"-18 UNF. end w/ 1/2" NPT pipe bushing
|
3000-0559 Lighted Volt Meter Gauge
|
|
IHS1905 Distributor Tachometer Drive - For IH distributor systems only
|
IHS3361 Tachometer Drive Gear - 13 Teeth
|
IHS256 Tachometer Cable - 66" long. 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
IHS3365 Tachometer Drive Housing Fitting - 3/4" - 20 pipe thread to 7/8" - 18 thread 1.407" overall length
|
IHS1840 Speedometer Drive Cable - Nylon sheath. 43" Long, 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
IHS532 Fuel Pressure Gauge - 0 - 80, It is a screw in type
|
|
|