ABC1925 Restoration Quality Cigarette Lighter
|
ABC016 Ammeter (Amp) Gauge (20-0-20) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC2238 Ammeter Gauge (60-0-60)
|
ABC109 Ammeter (Amp) Gauge (30-0-30) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter (Amp) Gauge 60-0-60 - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
ABC082 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC2353 Oil Gauge Adapter Fitting - 1/8" female to 1/4" Female - Fits 1/4" inverted flare
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC1593 Water Temperature Gauge - Dash mounted, not illuminated, 2" dia., 60" lead, 5/8"-18 U.F. end w/ 1/2" NPT pipe bushing, Probe dia. 0.374", length is 1-3/16"
|
ABC239 Water Temperature Gauge - Dash mounted, 110 degrees to 230 degrees, Includes 72" long heavy duty capillary tube, 5/8" - 18 UF thread with 1/2" NPT pipe bushing,
|
ACS1230 Tachometer Cable - 61-1/2 Length
|
FDS423 Steel Tachometer Cable - steel outer covering and has a 48" long cable w/ square ends
|
IHS248 Tachometer Cable - 63" LONG 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
COS021 Restoration Quality Wiring Harness - all with cutout relays, using 6 volt generator systems Only, includes light wires & instructions
|
OLS2919 Restoration Quality Wiring Harness Kit - for original 12 volt generator equipped tractors, includes light wires & diagram
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
IHS949 12 Volt Cigarette Lighter
|
ABC1862 6 Volt Cigarette Lighter With Socket
|
ABC527 Concave Light Mounting Washer / Retainer 2-1/4" OD. 9/16" Center hole. Metal.
|
IHS760 Ignition Key Switch 2 spade terminals. For use in 0.800" diameter hole. USA MADE
|
ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
ABC4279 3 Position Push/Pull Light Switch
|
ABC367 3 Position Switch Knob 10-32 thread 3 screw type terminals --- Plain face, black
|
ABC425 Knob For Light Switch Says: "Lights "Thread size: 10-32
|
ABC536 Combo Light Switch Knob
|