ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
ABC4279 3 Position Push/Pull Light Switch
|
ABC367 3 Position Switch Knob 10-32 thread 3 screw type terminals --- Plain face, black
|
ABC425 Knob For Light Switch Says: "Lights "Thread size: 10-32
|
ABC536 Combo Light Switch Knob
|
ABC541 Combo Light Switch Assembly with Knob 3 screw terminals
|
ACS139 Light Switch 3 Position Hi charge with lights Note: Switch manufacturers consider OFF as 1 position 0.800" diameter thread end, 10-32 thread Three screw type terminals
|
IHS590 Rear Combo Light Switch Knob Also fits original lights. This knob measures 0.250" inside diameter and 0.880" outside diameter. Our light switch knob includes a metal insert for a nice tight fit
|
ABC312 7 inch Headlight Ring
|
ABC307 Flat Headlight Lens 7 Inches Measures 6-3/4" diameter Glass
|
ACS150 Allis Chalmers Headlight Assy 6 Volt WC, WD & WD45 4-3/4" diameter curved lens 6 volt For 12 volt application please purchase IHS436 light bulb
|
FDS177 6 Volt Headlight Assembly 5 3/4" light Original sealed beam style NOTE: Stamped "TRACT - O- LITE" on housing.
|
FDS213 12 Volt Headlight Assembly 5 3/4" light Original sealed beam style NOTE: Stamped "TRACT - O- LITE" on housing.
|
IHS647 12 Volt Sealed Beam Universal Headlight Assembly This lamp assembly is often used with flat top fenders. Takes 4-1/2" (4.5") diameter sealed beam light. Outside bezel diameter is 5-3/16" (5.1875").
|
JDS603 6 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length--- CAN BE INSTALLED ON FRONT OR REAR --- BLACK, BULLET STYLE-
|
JDS606 12 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length Depending on your application you may install this tractor light as either a front or rear light.
|
ABC336 6 VOLT Headlight Assembly With Flat Lens This light uses different bulbs (IHS354 6 Volt or IHS436 12 Volt) than the USED OEM light assembly
|
ABC3032 Rubber Light Bezel This light bezel can be used as a front, rear or both light bezel when using a guide style light. 4.960" O.D. 3.250" I.D. 1.325" wide 4 inner slots
|
ABC347 - 7 Inch Headlight Gasket For 7" diameter lense
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
ABC3028 Rubber Light Bezel Without Guard This bezel has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353B Headlight Ring BLACK FINISH --- INTERCHANGEABLE WITH ORIGINAL
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
JDS676 Clamp Ring With Screw .885" wide
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC353 12-volt sealed lo-beam Lamp
|
ABC358 6-V Bulb 6 Volt And Double Contact Bulb Fits OEM 5-3/4" & 7" 6-Volt headlamps
|