ACS5620 Turn Signal (Flasher) Switch with Knob
|
IHS6237 Wiring Harness Grommet (O.E.M.) - USA Made
|
ABC2238 Ammeter Gauge (60-0-60)
|
IHS1837 Ammeter Gauge (60-0-60)
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
IHS787 International Charge Indicator Gauge
|
IHS789 Air Cleaner Change Indicator Gauge - This air cleaner change indicator gauge is calibrated properly
|
IHS768 International Tachometer - 3.75" O.D. at the bezel and 3.3170" O.D. of the housing. It has a clockwise rotation
|
IHS909 656, 966 Tachometer w/ Hydro Transmisson - Fits 544, 656, 666, 826, 966, 1026, 1066, Hydro 70, Hydr 86, Hydro 100 (Fits Gas & Diesel Engines)
|
IHS1788 Tachometer Cable - 87" Long 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
IHS1951 Tachometer/Speedometer Cable - 58 3/8" inner cable length. 5/8" - 18 threads on small threaded fitting. 7/8" - 18 threads on large threaded fitting. Square cable on both ends
|
IHS3361 Tachometer Drive Gear - 13 Teeth
|
IHS3365 Tachometer Drive Housing Fitting - 3/4" - 20 pipe thread to 7/8" - 18 thread 1.407" overall length
|
IHS1834 Speedometer Drive Cable - Nylon sheath. 45-1/8" long, Both ends have 5/8 - 18 fittings
|
IHS1840 Speedometer Drive Cable - Nylon sheath. 43" Long, 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
IHS795 Cluster Gauge Assembly - 80 Lead with a thread size of 11/16" x 24 UNF, 4.240" housing O.D., 1.230" housing length
|
IHS797 Cluster Gauge Assembly - 80" Capillary lead, 4.240" Housing O.D., 1.050" housing length
|
IHS791 International Tractor Fuel Gauge - 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit
|
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|
IHS3555 Restoration Quality Wiring Harness - all models with original 10SI alternator and flat top fenders, includes light wires & diagrams USA MADE
|
MIS3127 Auxiliary Heater - USA Made
|
IHS1784 12 Volt Cigarette Lighter with Socket
|
ABC3272 Ignition Key Switch With Keys There is a total of 6 spade terminals on this 4-position (on heat start) switch; 2 of the spades are 0.375" wide and 4 of the spades are 0.250" wide. The threaded end is 0.625".
|
IHS2322 Steering Column Grommet / Electrical Grommet - 2.375" O.D., 1.500" I.D., .375" Thick
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole - USA Made
| |