ABC016 Ammeter (Amp) Gauge (20-0-20) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC2238 Ammeter Gauge (60-0-60)
|
ABC109 Ammeter (Amp) Gauge (30-0-30) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter (Amp) Gauge 60-0-60 - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
IHS1837 Ammeter Gauge (60-0-60)
|
IHS395 International Ammeter Gauge
|
IHS418 International Harvester Ammeter Gauge
|
IHS527 Ammeter Gauge - Fits 2" diameter hole
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
IHS452 Dash Mounted Oil Pressure Gauge 0 to 75 psi - For models listed before 1946 with 1/8" male pipe threads
|
IHS454 Dash Mounted Oil Pressure Gauge 0 to 75 psi - For models listed 1947 and later - with 1/8" male pipe threads
|
ABC2353 Oil Gauge Adapter Fitting - 1/8" female to 1/4" Female - Fits 1/4" inverted flare
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
IHS453 Farmall Water Temperature Gauge - with a 16" lead, 5/8"-18 UNF. end w/ 1/2" NPT pipe bushing
|
IHS528 Water Temperature Gauge - for tractors 1939-46, 16 inch lead 5/8"-18 UNF. end w/ 1/2" NPT pipe bushing
|
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
IHS2629 Wiring Harness Wire Clip Set - USA Made
|
IHS843 Wiring Harness Grommet - Mounts in the bottom of the ammeter box, below the light switch.1.810" O.D.; 1.246" I.D.
|
|
|
IHS2927 Restoration Quality Wiring Harness Kit - Fits H, HV (with 1 wire 12-volt alternator) Includes light wires and diagram USA MADE
|
IHS480 Restoration Quality Wiring Harness - Fits "H" If converted to regulator on generator, 6 volt systems only USA MADE
|
IHS483 Restoration Quality Wiring Harness - Fits "H & HV" With Battery under the seat, 6 volt systems only USA MADE
|
IHS488 Restoration Quality Wiring Harness - Fits HV (sn 501 - 19233), Super H (up to SN: 19233 with battery under tank Using 4 Terminal Voltage Regulator USA MADE
|
IHS904 Restoration Quality Wiring Harness - Fits H, HV (ALL up to sn 340953 With cutout on top of Generator, 6 volt systems only, Includes Light Wires & Wiring Instructions USA MADE
|
IHS906 Restoration Quality Wiring Harness - Fits H, HV (ALL sn 340954 and up WITH REGULATOR UNDER FUEL TANK), 6 volt systems only USA MADE
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|