ABC016 Ammeter (Amp) Gauge (20-0-20) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC2238 Ammeter Gauge (60-0-60)
|
ABC109 Ammeter (Amp) Gauge (30-0-30) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter (Amp) Gauge 60-0-60 - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
|
NJD408 Ammeter Gauge - Can also be used on later models but the face plate color is not correct for tractors after mid 1952
|
ABC082 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC004 Universal Oil Pressure Gauge (0 - 30 PSI) - 1/8"NPT Male Thread, Engine / Governor Mounted
|
NJD420 Engine Mounted Oil Pressure Gauge - Can also be used on later models but the face plate color is not correct for tractors after mid 1952
|
NJD419 Oil Pressure Gauge - 1/8" male pipe threads
|
NJD423 Oil Pressure Gauge - 1/8" male pipe threads
|
ABC2360 Oil Gauge Adapter Fitting - For Gauges Without Removable Fitting---1/8" pipe female to 3/16" tubing female---
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
ABC239 Water Temperature Gauge - Dash mounted, 110 degrees to 230 degrees, Includes 72" long heavy duty capillary tube, 5/8" - 18 UF thread with 1/2" NPT pipe bushing,
|
NJD1539 Water Temperature Gauge - 48" right angle lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD1469 Water Temperature Gauge - 23" lead and it fits John Deere hand start models, Mounting studs measure 1 17/32" C.C. 5/8-18 UNF end with 1/2" NPT pipe bushing
|
NJD1718 Water Temperature Gauge - 48" Lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD424 Water Temperature Gauge - 36 inch capillary lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD422 Water Temperature Gauge - 72 inch capillary lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD421 Water Temperature Gauge - Can also be used on later models but the face plate color is not correct for tractors after mid 1952
|
NJD425 Water Temperature Gauge - 72 inch capillary lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD584 Tachometer - Mounting studs are in the correct location
|
JDS1782 Tachometer Bracket
|
JDS712 Tachometer Cable - this tach cable is now steel --- 8.25" Total length from tip to tip of inner cable, outer sheath length = 7 1/2" 5/8 - 18 x 7/8 - 18 threads with Key on one end
|
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|