ABC2238 Ammeter Gauge (60-0-60)
|
ABC109 Ammeter (Amp) Gauge (30-0-30) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter (Amp) Gauge 60-0-60 - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
|
|
ABC082 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
NJD1702 Oil Pressure Gauge (0-55 PSI) - 1/8" male pipe threads
|
NJD423 Oil Pressure Gauge - 1/8" male pipe threads
|
ABC2360 Oil Gauge Adapter Fitting - For Gauges Without Removable Fitting---1/8" pipe female to 3/16" tubing female---
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
ABC239 Water Temperature Gauge - Dash mounted, 110 degrees to 230 degrees, Includes 72" long heavy duty capillary tube, 5/8" - 18 UF thread with 1/2" NPT pipe bushing,
|
NJD1718 Water Temperature Gauge - 48" Lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD425 Water Temperature Gauge - 72 inch capillary lead, 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
NJD584 Tachometer - Mounting studs are in the correct location
|
JDS4771 Tachometer Drive Gear
|
JDS4806 Tachometer Drive Gear
|
JDS1209 Tachometer Cable - 21 3/4" long 5/8 - 18 x 7/8 - 18 threads with Key on one end
|
JDS777 Tachometer Cable - 17.75" from tip to tip of inner cable, metal sheath covering, like OE, Outer sheath length = 17 1/4" 5/8 - 18 x 7/8 - 18 threads with Key on one end
|
JDS1707 John Deere Electric Fuel Gauge - 12 volt positive ground systems
|
JDS1910 Fuel Gauge - 6 Volt positive ground only.---For Diesel Pony Start Tractors ONLY
|
JDS3476 12 Volt Negative Ground Fuel Gauge - for tractors that have been converted to negative ground ONLY
|
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|
JDS2913 Restoration Quality Wiring Harness Kit - For 12/24-volt generator, Includes light wires & diagram
|
JDS2911 Restoration Quality Wiring Harness Kit - For 6-volt generator systems only, Includes light wires & diagram USA MADE
|
JDS2891 Restoration Quality Wiring Harness Kit - gas or all fuel with cowl mounted lights and generator, Complete with light wires & instructions, for 12-Volt generator systems USA MADE
|