Electrical System Parts
ACS3713 Fuel Gauge with Gasket
|
ABC2238 Ammeter (Amp) Gauge
|
ABC466 Ammeter Gauge - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
ACS258 Ammeter - 2" Dia Hole
|
ACS4511 Allis Chalmers Ammeter
|
ACS1833 Ammeter - For tractors converted to 12-v system, Fits 2" dia. hole
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
ACS4455 Allis Chalmers Water Temperature Gauge
|
ACS4494 Temperature Sending Unit - Fits Allis Chalmers D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000
|
3000-0559 Lighted Volt Meter Gauge
|
ACS303 Tachometer / Operation Meter - Operation Meter is driven off of your ALTERNATOR, ratio is 1 : 1.5, must use original Tach Drive Assy
|
ACS2809 Tachometer Drive Gear and Shaft - 12 Teeth
|
ACS2803 Tachometer Drive Assembly - 12 Teeth on Drive Gear, 45 Teeth on Driven Gear
|
ACS2711 Tachometer Cable - 64-1/2" long with square ends
|
ACS2805 Tachometer Driven Gear With Shaft - 45 Teeth
|
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole
| |
|
|