ABC016 Ammeter (Amp) Gauge (20-0-20) - Fits 2" diameter hole, Threaded Terminal Type
|
MMS027R Ammeter Gauge - Restoration Quality
|
MMS027RC Ammeter Gauge - Restoration Quality
|
ABC2238 Ammeter Gauge (60-0-60)
|
ABC109 Ammeter (Amp) Gauge (30-0-30) - Fits 2" diameter hole, Threaded Terminal Type
|
ABC466 Ammeter (Amp) Gauge 60-0-60 - Fits most tractors equipped with alternator, Fits 2" Diameter hole, Threaded Terminal Type
|
|
ABC082 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
ABC005 Universal Oil Pressure Gauge - Dash mounted gauge, requires a 2" diameter hole, 1/8" NPT Male Threads
|
MMS029R Oil Pressure Gauge - Restoration Quality, 1/8" male pipe threads
|
MMS029RC Oil Pressure Gauge - Restoration Quality, 1/8" male pipe threads
|
ABC2360 Oil Gauge Adapter Fitting - For Gauges Without Removable Fitting---1/8" pipe female to 3/16" tubing female---
|
ABC2353 Oil Gauge Adapter Fitting - 1/8" female to 1/4" Female - Fits 1/4" inverted flare
|
ABC538 Oil Gauge Fitting - For gauges without removable fitting
|
IHS626 Oil Gauge Fitting - For gauges without removable fitting 1/8" pipe to 1/4" compression
|
ABC523 Oil Pressure Gauge Copper Line Kit
|
MMS031RC Water Temperature Gauge - Restoration Quality, 72 inch capillary lead length Has 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
MMS031R Water Temperature Gauge - Restoration Quality, 72 inch capillary lead length Has 5/8-18 UNF end w/ 1/2" NPT pipe bushing
|
ABC1593 Water Temperature Gauge - Dash mounted, not illuminated, 2" dia., 60" lead, 5/8"-18 U.F. end w/ 1/2" NPT pipe bushing, Probe dia. 0.374", length is 1-3/16"
|
ABC239 Water Temperature Gauge - Dash mounted, 110 degrees to 230 degrees, Includes 72" long heavy duty capillary tube, 5/8" - 18 UF thread with 1/2" NPT pipe bushing,
|
OLS130 12 Volt Negative Ground Temperature Gauge
|
FDS1491 Electric Water Temperature Sending Unit - 1/8 pipe thread includes 1/8 x 3/8 adapter bushing
|
ACS1230 Tachometer Cable - 61-1/2 Length
|
IHS256 Tachometer Cable - 66" long. 5/8 - 18 x 7/8 - 18 threads with square on both ends
|
JDS790 Tachometer Cable - 56" inside cable length, Keyed & Square ends, 5/8-18 x 7/8-18
|
OLS129 12 Volt Negative Ground Fuel Gauge
|
MIS065 Battery Disconnect Switch - Can also be used to stop battery drain on a tractor in storage. USA MADE
|
ABC2285 Electrical Outlet Socket Boot - Fits tractors using single wire outlet
|
ABC395 Electrical Outlet Socket 2 plated brass pins, All implements with lights
|
ABC1868 Auxiliary Male 2-PIn Connector Plug - Plated brass pins, 0.760" wide, 3.045" total length and 0.340" hole diameter for wires
|