ABC543 Carburetor Gasket - 1-13/16" C - C Bolts --- 15/16" Center hole
|
|
ABC454 Zenith Carburetor Float
|
ABC190 Zenith Carburetor Float - 2.170" at widest point overall length, 1.826" overall height
|
ABC1355 Zenith Carburetor Float - 3.463" at longest point overall length, 2.300" overall height
|
ABC036 Carburetor Float For small bowl Marvel Schebler carbs. The dimension from center of pin hinge to end of pontoon = 2.375 length
|
ABC037 Marvel Schebler Carburetor Float For large bowl Marvel Schebler carburetors
|
ABC361 Marvel Schebler Carburetor Float
|
ABC133 Viton Needle Float Valve - Fits Marvel Schebler Carburetors, VITON needle & seat helps stop carburetor flooding. 3/8-27 thread, 0.100" orifice size - USA Made
|
ABC230 Marvel Schebler Viton Needle Float Valve - Viton Needle and seat helps stop carb flooding. The orifice measures.080" diameter. 3/8"-27 thread - USA Made
|
ABC564 Zenith Main Jet Adjusting Needle Assembly -Used as an adjustable load nozzle assembly to eliminate the electric solenoid when used on Zenith 13783 carburetors.
|
ABC562 Main Load Adjusting Needle Assy w/ "T" Handle - 3/8" - 24 UNF.
|
JDS1067 Main Load Adjusting Needle Assy w/ "L" Handle 3/8-24 UNF Threads
|
ABC1159 Throttle Butterfly Disc for Marvel Schebler Carburetor - USA Made
|
ABC1182 Choke Butterfly Disc 1-5/16" OD*** FOR MARVEL SCHEBLER CARBURETORS
|
ABC1354 Zenith Throttle Shaft - 3.625" Overall length, 3.180" Shaft length
|
ABC513 Throttle Body Repair Bushing - Repairs worn throttle bodies using 1/4" throttle shafts, For small bowl Marvel Schebler carburetors - USA Made
|
ABC297 Carb Elbow Strainer Assembly - Fits various Marvel Schebler Models. Also fits tractors with the Carter UT series carburetors. Must have internal threads, Used with flair fitting not compression fitting Male end
|
AVS002 Carburetor Repair Kit - Tillotson
|
MMS1916 Black Rubber Throttle Knob - 0.427" I.D. hole, 1.457" overall length
|
OLS5336 Air Cleaner Hose - Fits Minneapolis Moline G750 and Oliver Gas: 1650, 1655
|
|
|
FDS033 Air Cleaner Inner Oil Cup - 1.054" Tall, 4.486" O.D., 3.741" I.D.
|
JDS540 Air Cleaner Outer Oil Cup - Measures 5.750" OD and 5.375" ID and is 3.125" Tall
|
FDS034 Air Cleaner Oil Cup - 4-3/4 O.D., at the lip, 3" tall, 4-15/32" I.D. - is designed for air cleaners using a clamp held cup, Does not fit air cleaners with (2) clips holding the bowl
|
JDS541 Air Cleaner Oil Cup Clamp
|
ABC422 Oil Bath Air Cleaner Filter Element - Fits most oil bath air cleaners to replace the mesh in the existing air cleaner--Approximately 3" wide X 78" long per bag --- Uses 2 bags for Utility tractors
|
R6996TS Air Pre-Cleaner Assembly - Top Spin
|
ABC339 Precleaner Bowl - 10-1/2 Top O.D., 4" Tall, fitting models with 3" to 4" inlet
|
ABC484 Small Precleaner Bowl Clear Plastic - 5-1/2" O.D.
|