Fuel System Parts
ABC038 Fuel Sediment Bowl Assembly - 3/8" Pipe thread inlet, 1/4" Tube outlet
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC319 5 Pack Fuel Sediment Bowl Screen - Square hole screen, 1 3/4" outside diameter
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC3765 Fuel Sediment Bowl Screen - Square hole screen C875 silicone bronze alloy 1 3/4" outside diameter
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
FDS176 Ford Fuel Tank - 22-3/4" C.C. length on mounting holes, 8" high, 15" width without flange, Steel, not lined
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
FDS1603 Fuel Tank Rubber Bumper - 0.985" O.D., 0.500" Tall
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ABC003 Vented Fuel Tank Cap - 2.780" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
FDS167 Fuel Cap - 2.585" O.D., 1.825" tang to tang length, .365" tang width, includes gasket
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
|
FDS485 Fuel Line Assembly - Fits Ford 2N, 8N, 9N (1939-1952) - USA made
|
ABC4285 Fuel Line Adapter Fitting
|
FDS151 Quadrant Throttle Plate
|
FDS158 Throttle Control Linkage -23-3/8" throttle to governor control
|
FDS156 Throttle Control Linkage - 7" governor to carburetor control
|
FDS413 Throttle Control Lever Assembly - 20.250" overall length, 0.375 O.D.
|
FDS411 Throttle Quadrant Screw Kit -10-24 X 3/8"
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
FDS262 Aluminum Choke Knob
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC029 Governor Repair Kit, Basic - kit includes gasket, lower race assembly, ball bearing, C-clip, shim and 5/8" governor balls
|
ABC030 Governor Repair Kit, Complete - includes lower race assembly, shaft assembly, upper race assembly, ball bearing assembly, drive shaft ball stop shim, 5/8" governor balls, bushings, gasket, dust seal and C-clip - USA Made
|
|
|