Fuel System Parts
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
ACS6002 Governor Rod Linkage Spring - Fits Allis B, IG, C, WC, WD, WD45, WF
|
ACS172 Radiator or Fuel Cap
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ABC003 Vented Fuel Tank Cap - 2.780" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
ABC092 Gas Fuel Strainer Assembly - 3/8" pipe inlet, 1/8" pipe outlet, includes a 5/16" line compression adaptor fitting, 1.280" bowl length
|
ABC4632 1/4" Fuel Line Adapter Fitting - USA Made
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
ACS1974 Steel Fuel Line - 13-1/8" overall length, 1/4" tube O.D., 1/4" compression fittings
|
ABC4285 Fuel Line Adapter Fitting
|
ACS166 Governor, for Magneto ignition - For magneto ignition, or for tractors with aftermarket distributor kit DELCO #1111411 (Will NOT fit factory Allis distributor) ** 3.775" O/A Length
|
ACS3733 Governor Gear Bushing - Note: Mounts in front of the engine block
|
ACS162 Governor Assembly, for Distributor Ignition - For tractors with Allis Chalmers factory distributor.
|
ACS304 Governor Rod Linkage Spring - Fits Allis B, IB, C, CA, D10, D12, D14, D15, RC, I400, I600
|
ACS3739 Front Governor Shaft Bushing - 0.437" I.D., 0.625" O.D., 0.496" overall length
|
|
|