JDS6527 Choke Throttle Lever Assembly - John Deere Tractors Fits: 1020, 1520, 2020, 2030, 2510, 2520
|
ABC092 Gas Fuel Strainer Assembly - 3/8" pipe inlet, 1/8" pipe outlet, includes a 5/16" line compression adaptor fitting, 1.280" bowl length
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
JDS642 Sediment Bowl Gasket - 2.150 O.D. - USA Made
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
|
ABC5935 Fuel Filter Element with seals for CAV / Simms Fuel Filters
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
JDS593 Fuel Tank Filler Neck Grommet - 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR).
|
JDS3429 Fuel Sending Unit - Fits JD 1010 Gas or Diesel & for Positive and Negative Ground Systems, 0 to 30 ohms 6-3/4" overall length 2" bolt circle
|
JDS3432 Fuel Sending Unit - Fits JD 2010 Gas or Diesel & for Positive and Negative Ground Systems, 0 to 30 ohms 7-1/8" overall length 2" bolt circle
|
ABC3256 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.091" thick - USA Made
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ABC003 Vented Fuel Tank Cap - 2.780" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
JDS742 Red Rubber Cover - only fits caps with 3.240" O.D.
|
JDS729 Fuel Cap - 4.040" red cover O.D., 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center dia. 1.375" tall
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
|
|
ABC4285 Fuel Line Adapter Fitting
|
JDS4119 Steel Fuel Line (Fuel Tank to Lift Pump) - Approx. 41-1/2" long straight across. 46-1/2" long with bends
|