Fuel System Parts
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks)
|
ABC5923 Cav Fuel Filter Bowl Seal
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
ABC003 Vented Fuel Tank Cap - 2.700" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
IHS577 Auxiliary Fuel Cap - .350" tall, 1.785" inside dia., 1.965" O.D., 1.437" tang to tang length, .352" tang width, includes gasket
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
ABC2426 Choke or Fuel Shut Off Cable Clip - For Marvel Schebler Carburetors
|
ABC499 Fuel Sediment Bowl Assembly - 1/8" pipe thread (both ends)
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
IHS713 All-Fuel Sediment Bowl - This sediment bowl is designed for tractors with 2 fuel tanks, 3/8" Pipe inlet. 2 - 5/16" Compression outlets Fuel lines thread directly into the sediment bowl housing
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
JDS642 Sediment Bowl Gasket - 2.150 O.D.
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
|
|