Fuel System Parts
ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks)
|
IHS5662 Fuel Filter Bleeder Valve
|
ABC5935 Fuel Filter Element with seals for CAV / Simms Fuel Filters
|
ABC5920 Cav Fuel Filter Housing Seal
|
ABC5923 Cav Fuel Filter Bowl Seal
|
IHS6031 Fuel Shutoff Valve - Fits Hydro 84, 268, 278, 454, 464, 484, 574, 584, 674 Diesel, 684, 784, 884
|
IHS5954 Governor Control Handle Spring - Fits IH Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 1026, 1206, 1256, 1456, 4100, 4156, 4166, 4186 - USA Made
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3261 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.132" thick and there are five (5) 1/4" screw holes
|
IHS886 Fuel Sending Unit - for negative or positive ground, 32 Ohm full to 244 Ohm empty
|
ABC3256 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.091" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
IHS416 Triple Baffle Fuel Cap - 7/8" O.D., 2-1/2" tall, 2.144" tang to tang length, .400" tang width, 1.840" inside center dia.
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
ABC1421 Fuel Filter With Seals - 3-1/2" O.D., 3/4" I.D., x 2.85" tall
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
IHS3879 Fuel Filter Glass Bowl - Rounded bottom 0.350" I.D., center hole 3.660" O.D., gasket mounting flange 3.625" O.D., bowl Gasket not included
|
ABC3882 Fuel Filter Glass Bowl - 1" I.D. center hole, 2" tall 3.689" O.D., gasket mounting flange, 3.300" O.D. bowl, Flat bottom with squared edge, Gasket not included
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
|
|