Fuel System Parts
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ACS1974 Steel Fuel Line - 13-1/8" overall length, 1/4" tube O.D., 1/4" compression fittings
|
ABC4285 Fuel Line Adapter Fitting
|
4796K71 In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
ABC4632 1/4" Fuel Line Adapter Fitting - USA Made
|
ACS317 Governor Gear - Fits 4 cylinder gas with 226 cubic inch engine
|
ACS319 Governor Weight Pin - Fits 4 cylinder gas with 201 or 226 cubic inch engines
|
ACS318 Governor Weight - Fits 4 cylinder gas with 201 or 226 cubic inch engines
|
ACS3733 Governor Gear Bushing - Note: Mounts in front of the engine block
|
ACS162 Governor Assembly, for Distributor Ignition - For tractors with Allis Chalmers factory distributor.
|
ACS304 Governor Rod Linkage Spring - Fits Allis B, IB, C, CA, D10, D12, D14, D15, RC, I400, I600
|
ACS3739 Front Governor Shaft Bushing - 0.437" I.D., 0.625" O.D., 0.496" overall length
|
ACS5732 Governor Lower Lever Compensating Spring
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
JDS642 Sediment Bowl Gasket - 2.150 O.D.
|
ABC002 Sediment Bowl Assembly - Includes shallow bowl (1.280" tall) w/ 3/8" pipe inlet, & (2) 1/8" pipe outlets
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC092 Gas Fuel Strainer Assembly - 3/8" pipe inlet, 1/8" pipe outlet, includes a 5/16" line compression adaptor fitting, 1.280" bowl length
|
ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ABC003 Vented Fuel Tank Cap - 2.780" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
ABC1221 Gasket fits AC and Case Fuel Cap, or IH and JD Fuel Strainers - 2.242" I.D., 2.948" O.D., rubberized cork - USA Made
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
ACS336 Fuel Cap - 3.475" O.D., 2.505" tang to tang length, includes gasket
|
|
|